Plate ACEID t.6mm 1500 * 1000 18.5kg

Brand: Украина

Product Code: 07143

In Stock

286.00 грн

/pcs

Found this product cheaper?

Dimensions (width, length)

Return guarantee Free exchange/return of goods within - 1 day Official warranty from the manufacturer - 12 months Payment Cash, Visa/MasterCard, payment via Privat24, non-cash settlement

ATSEID plate t.6mm 1500 * 1000 18.5kg - is an excellent electrical material for a wide range of applications with increased arc resistance and electrical strength and is intended for the manufacture of electrical panels, parts and bases of electrical machines, housings of arc extinguishing chambers, gaskets and plates of induction furnaces, fences for electric furnaces etc., where protection and work at high voltages is required, as well as building structures, which are subject to increased strength requirements in comparison with asbestos-cement sheet. The application is effective at high temperatures, withstands combustion temperatures over 1000 degrees, is used in blast furnaces.

Due to its relatively low cost and high performance, it is widely used in all types of construction. The material is produced in the form of boards with dimensions 1200 * 800mm, 1500 * 1000mm, the thickness varies depending on the scope of application: 6, 8, 10, 16, 20, 25, 30, 35 and 40 mm.

Aceid plates, depending on the ultimate strength in bending, are assigned the following grades: Aceid 350, Aceid 400, Aceid 450 and Aceid 500.

Industrial applications are wide and varied. For example, this material is the best suited for the decoration of premises in which high-voltage wires pass, in factory workshops for the installation of spark extinguishing partitions, fences for electric furnaces and arc extinguishing chambers. In the technical field, you can buy ACEID as a heat-resistant and non-conductive material to solve several construction problems at once. In hospitals, aceid is used to protect ceilings from the destructive effects of disinfectant solutions.

You can buy ATSEID plate t.6mm 1500 * 1000 18.5kg from us at the most favorable price in Ukraine. A wide range of products allows us to quickly and efficiently fulfill any orders, helping to complete any construction work on time.

The main thing

View by manufacturing method

The raw materials for pressing asbestos-cement electrical insulating boards are mixed from three components: chrysotile-asbestos fibers, Portland cement M400, process water in accordance with GOST 23732-2011. During the mixing process, Portland cement acts as a binder. A strong bond is created between asbestos fibers, which ensures high strength of the finished sheets. The raw material is fed to the drum under a pressure of 20-25 MPa, and then sheets of the required size are cut from the roll using circular or guillotine knives. The material hardens and gains strength within 3-4 hours. ACEID sheets are tested for compliance with the declared technical parameters twice: after 6-7 hours and after 10-14 days. The test results are recorded in the building material passport, which is issued for each batch. Shipment of ATSEID slabs to the consumer is carried out after 14 days.

Chemical composition

water, chrysotile asbestos fiber and portland cement

Type by purpose

ATSEID boards are an excellent electrical material for wide use with increased arc resistance and electrical strength and are intended for the manufacture of electrical panels, parts and bases of electrical machines, arc-extinguishing chamber housings, gaskets and plates of induction furnaces, electric furnace fences, etc., where protection is required and work at high voltages, as well as as building structures, which are subject to increased requirements for strength indicators in comparison with asbestos-cement sheets. For example, this material is ideal for finishing rooms where high-voltage wires pass, in factory workshops for installing spark-extinguishing partitions, fencing electric furnaces and arc-extinguishing chambers. In the technical field, you can buy ACEID as both a heat-resistant and non-conductive material to solve several construction problems at once. In medical institutions, aceid is used to protect floors from the destructive effects of disinfectant solutions.

A type

ATSEID plate

Dimensions (width, length)

1200*800мм, 1500*1000мм

Additional services

Cutting is carried out according to the client's order and packaging of products according to the client's orderSent by any carriers in Ukraine

The country of manufacture

Ukraine

No questions about this product, be the first and ask your question.