Настил просічно-профільований SERRATED-180/75 (75x180x3000)-2,5 х/к 08кп

View by manufacturing method

It is manufactured using an industrial method of cold processing sheet metal. The main stages of production: A steel sheet (usually low-carbon steel) is used, which can have a zinc or polymer coating to protect against corrosion. The sheet is fed into a special press, where punches punch rows of elongated holes in it. These holes are made at a certain pitch to ensure the optimal combination of strength and lightweight construction. Simultaneously with punching or after it, the sheet is stretched and formed, forming a cellular structure. This increases rigidity and reduces the weight of the decking. The finished PPN is cut into panels of the required size. Quality control is carried out, and sometimes a protective coating is additionally applied.

Chemical composition

The chemical composition of expanded metal sheeting depends on the grade of steel it is made of. Most often, ordinary carbon steel is used (grades such as St0, St1, St3), and less often, low-alloy options.

Type by purpose

Expanded metal sheeting is used for the construction of: stair steps and ramps, bridges and walkways, scaffolding and platform decking, floors, temporary decking, work platforms, decking at chemical and oil and gas industry facilities, for creating equipment maintenance platforms and pedestrian walkways on roofs.

Dimensions (width, length)

75x180x3000 mm

Additional services

Cutting is carried out according to the client's order and packaging of products according to the client's orderSent by any carriers in Ukraine

The country of manufacture

Ukraine