Steel mesh hinged height 1,2 m, length 25 m, this is one of the most budget options for fencing. The unique feature of the hinged grid is that the cells in the lower part of the roll have a minimum height of 5 cm, while in the middle part the cell height is 10-15 cm, and several upper rows of cells have a height of 20 cm. due to the gradual increase of the cell, small animals cannot enter the fenced area, and the largest upper cells detain large animals and people. It is also worth noting that hinged meshes are light in weight, and, accordingly, cost (the price of a hinged mesh fence is approximately equal to the price of a chain-link fence).
Due to their low cost, hinged meshes are widely used for fencing large areas, such as:
• Forest areas;
• Agricultural land;
• Automobile and forest roads;
• Railways;
• Summer cottages.
However, do not think that the low cost of such a grid is reflected in its quality! The hinged mesh is made of high-quality, hot-dip galvanized wire (GOST 3282-74) in compliance with the full technological cycle. Thanks to this, the fence made of such a mesh is not afraid of snow and rain, mechanical damage and other negative influences. Just like other meshes that do not have welded joints, the hinged mesh has an increased margin of safety and has an extended service life.
The hinged mesh is a carbon steel wire product. Characterized by increased lightness and strength. Available in rolls of various lengths.
The name "hinged" refers to the method of connecting the wire mesh elements to each other. For fastening the transverse and longitudinal wires, the DFL hinged assembly is used. This fixation favorably distinguishes the hinged network from the chain-link, welded and twisted mesh.
The standard length of wire rods is 1-2.5 m. The diameter of the wire used is in the range of 1.8-2.5 mm.
One of the main features of the grid is the progressive cell height. The vertical side of the cells increases in the direction from the bottom edge of the grid to the top. The horizontal side remains unchanged and is usually between 150 and 300 mm.
Areas of application of nodal materials: for fences and others
Hinged mesh fence. Photo M-Set
Hinged mesh is used for the manufacture of functional, high-quality, inexpensive and durable fences. Mesh fences are widely used and are actively used by individuals and companies to protect territories. The DFL grid has proven itself well in the following areas:
Agriculture:
restriction of the movement of domestic animals (pens, pastures);
fencing of gardens, fields with vegetable crops to protect against pests.
Private sector:
fencing of the adjacent territory and subsidiary plots;
support for climbing and creeping plants (including vineyards);
enclosures for keeping pets.
Urban areas:
fencing of open areas for various economic purposes (for example, fencing of technical territories, construction sites, sanitary zones);
sports grounds;
enclosures in dog kennels.
Restriction of movement of wild animals:
fencing of busy highways and railways;
restriction of the territories of reserves, wildlife sanctuaries, forestries, hunting grounds.
The versatility of the mesh is due to its operational characteristics, ease of working with the material, attractive price for the construction of fences of short and long lengths.
Advantages
Hinged galvanized mesh. Setkoff Photos
The high interest of consumers in the material is associated with the obvious advantages of the hinged mesh in relation to analogues:
Hinge knot. Due to the features of the DFL node, the entire mesh acquires mobility relative to the tension axis. This feature allows you to simulate various options for fencing designs.
The hinged grid is not subject to deformation. Under mechanical action, it quickly returns to its shape, which is explained by its high tensile strength.
The process of installing a hinged material fence is simple and hassle-free.
Attractive price. The design features of the grid allow you to save on raw materials, reducing the cost and consumer price of the material.
Savings on additional materials. Installation of a fence made of DFL mesh allows you to reduce the number of supports used by up to two times.
Progressive cells increase the functionality of the fence:
small cells near the surface limit access to medium-sized animals;
a large mesh in the upper part of the fence significantly lightens the weight of the product, preventing deformation and increasing the service life.
Higher protective properties of the metal compared to welded versions, where the anti-corrosion coating is damaged at the points of contact with welding.
Using a larger diameter wirehorizontal edges of the mesh increases the stability of the finished fence.
Production and equipment
Industrial production of hinged mesh in large volumes is carried out on automated machines. The general scheme of the process is as follows:
The wire feed into the machine is automated directly from the wire coils.
The ends of the wire are threaded into the machine at intervals equal to the mesh width. The width of the future roll depends on the number of coils in the work.
The machine performs interlacing of horizontal and vertical wires.
The finished mesh is wound on a special drum.
The dimensions of the equipment can vary, occupying different square meters. The dimensions of the machine directly depend on the width of the mesh produced. All stages on a single machine are performed by one operator, which significantly reduces the cost of the final product.
SHAR2400
The model is a fully automated solution that allows you to produce mesh in large volumes.
The machine works with wire of different diameters and allows you to produce products with almost any mesh size.
Specifications:
automatic wire feeding into the machine from bays;
maximum mesh width - 2400 mm;
maximum wire diameter - 3 mm;
cell sizes - from 75x75 to 300x300 mm;
power consumption - 5.6 kW / h.
CY 2400D
Reliable and easy to operate, the machine is capable of producing various types of hinged mesh in a fully automatic mode.
For high productivity and elimination of manual labor, the machine uses a material supply system from coils, and a frequency converter allows you to adjust the speed of the process and save energy consumption.
A wire with a thickness of 1.8 to 3 mm is used, at the end of the material the machine will stop automatically, the length of the hinged mesh winding is set in the control unit and controlled by a sensor.
Now hinged mesh, due to quality and low cost, is rapidly gaining popularity. However, mistakes can still be made during production. The galvanized surface should not have centers of corrosion, because this will tell you about a violation of the technology for applying a protective coating. Try not to take products from this manufacturer in the future, even if they look good. You also need to pay attention to the height. If the grid is low, by definition it will cost much more, because due to the design features, the cells at the bottom are much smaller than the top ones.
Be sure to check the presence of reinforced wire rods on the upper and lower borders of the product. If they are not, then the structure will not be rigid enough, and additional difficulties will arise during installation. Then carefully inspect the longitudinal wire, it should have small zigzags. They do not allow moisture to accumulate in the knots. Take a look at the nodes themselves. Since they have to move relative to each other, they must also have a well-galvanized surface without notches, chips and other defects.
You can buy a steel mesh hinged height 1,2 m, length 25 m from us at the best price in Ukraine. A wide range of products allows us to quickly and efficiently fulfill any order, helping to complete any construction work on time.
