Masonry mesh 60x60, d 3 mm, 2x1.0 m

Masonry mesh 60x60, d 3 mm, 2x1.0 m is widely used in all types of construction, restoration and repair. It is necessary for reinforcing and strengthening concrete and cement foundations, brickwork, aerated concrete walls.

It is used in precast monolithic, as well as in reinforced concrete and stone structures. It is necessary when pouring ready-made concrete, performing floor screed. Often used when plastering uneven walls.

The main purpose is to strengthen the strength of the finished structure due to better bonding of the mortar and consumables. Structures reinforced with masonry mesh are characterized by maximum durability and wear resistance. The grid is one of the main and basic components of residential and industrial construction.

The masonry mesh is manufactured in accordance with GOST 23279-85 standards. In accordance with its requirements, finished products are made of thin wire or reinforcement with a diameter of 3 to 10 mm. Typically, wire Vr-1 or V-1 (GOST 6727-80) and bar blanks of reinforcing steel are used. According to the degree of surface coverage, masonry nets are produced without coating (black) and coated (galvanized). Zinc coated meshes are more durable, less susceptible to environmental influences and corrosion. To give the nets additional protective and decorative properties, the galvanized nets are plasticized with a PVC coating. The last condition is especially important for their "outdoor" use as, for example, fences. The nets are produced in rolls or in cards (flat), with a roll width of 650 - 3800 mm. Sizes of nets produced in cards: mesh width 1500, 2000 and 2350, length 3000 and 6000 mm.

You can buy a Masonry Grid 60x60, d 3 mm, 2x1.0 m from us at the most favorable price in Ukraine. A wide assortment allows us to quickly and efficiently fulfill any orders, helping you to complete any construction work on time.