Crimped mesh mesh 100x100mm is a corrugated and then woven mesh in sheets (cards) on special equipment. It is corrugation that makes the mesh wear-resistant and very tear-resistant.
The grid canned is made from a wire according to GOST 3306-88, with square cells. The service life of the mesh is significantly increased due to the use of high-carbon steel wire. The wire mesh is used for the manufacture of fences for construction sites and private houses, for reinforcing reinforced concrete structures and heat-insulating materials. Wire caniling ensures the production of mesh even from very thick wire, the maximum mesh size is 100 by 100 mm. The grid caniled is made and a corrugated wire according to GOST 3306-88. It is used for the manufacture of various types of industrial fencing, allows for the filtration of building materials. Very good for building fences and barriers
Designed for screens and other installations for screening. Widely used in the mining industry, agriculture and construction. The grid is made in cells in the form of a square, the size of the cells is from 3 to 100 mm. It is possible to manufacture in larger sizes.
For the production of corrugated (canned) meshes, wire from high-quality high-carbon steel grades st.70-85 (spring wire) is used
Classification and production
Several types of this material are produced. When they say about a canned mesh that it is corrugated ("P"), then the weft and warp wires have bends at all intersections. Such canvases have a cell size of not more than 25 mm. "CR", or partially corrugated, consists of a straight warp wire, only weft rods are bent. The size of the sockets in this case does not exceed 4 mm. But when both wires have waves not only at the junctions, but also on the sides of the cells (the size of which is from 25 to 100 mm), then such a mesh is considered complex corrugated ("CP").
The next parameters according to which the classification is carried out are the size of the cells and the thickness of the rods. The former are in the range from 3x3 to 100x100 mm, but on an individual order, manufacturers can produce a mesh with larger sections. In this case, the larger the area of the nest, the thicker the wire should be used.
Classification and production
Product with large sections
Sometimes, in order to reduce the cost of production, a thinner wire is taken to make a web with large cells, but this will negatively affect the quality and strength characteristics of the product. This approach will not lead to savings.
These sheets are made mainly from high-carbon, stainless and galvanized steel wire with a diameter of up to 10 mm. First, the blanks are processed on a special beading machine to form a wavy profile. This ensures a secure connection even with large diameter rods exceeding 6 mm. Further, these strips of circular cross section are woven.
The size of the cells directly depends on the relief, so if you need to set up the production of different types of mesh, you will need several sets of bending gears, with the help of which the profile is formed. At the same time, the products pass control: the presence of defects, and especially cracks on the surface, is unacceptable. Canned mesh is produced in cards no longer than 6 m and up to 2 m wide. It is worth noting that the use of galvanized wire will significantly increase the service life of the product. Such canvases are absolutely not afraid of moisture and have a more attractive appearance.
We make a strong fence from an unusual mesh
Most often, for private purposes, such a corrugated mesh is used as a fence. The advantages of this type of fences include easy installation, strength and durability. And it doesn't need to be painted. Work should begin with the planning and preparation of the site. We remove all debris and, if necessary, level the ground. Next, we make the markup and install the corner posts. Be sure to concrete them, this will give the necessary stability.
We make a strong fence from an unusual mesh
Corrugated mesh fencing
To check whether the supports have the same height, you need to pull two cords in the uppermost and middle parts. According to the first, we check the horizontalness with a water level, but the second helps to install vertical elements in the same plane. Now, focusing on the stretched threads, we expose the intermediate pillars. If you plan to build a fence more than 2 meters high, or loose soil prevails on the site, then you need to fill in the strip foundation. To do this, we dig a trench with a depth of 0.5 to 1 m and a width of 30 cm. Next, we assemble the formwork from the boards and pour gravel to the bottom, after which we hammer in the supports and pour concrete.
Now it is necessary to assemble rectangular or square frames from metal corners, corresponding to the size of the grid. At this stage, you will need welding equipment and preferably some skills. Be sure to check the perpendicularity of the corners with a construction square. Zaklwe put a sheet of metal rods into the inner part of the frame and fix it by welding.
Further, when erecting a fence from a canned mesh, the finished sections should be fixed to the posts. We prepare small metal strips and weld them to the vertical axes. Then we expose between the pillars of the section so that the distance to the pipes on both sides is the same. We fix their position with the help of temporary supports and weld them to the metal strips.
You can also make a bolted connection, in which case the fence design will turn out to be collapsible. But, it is possible that the hardware will have to be tightened periodically. It is better to muffle the upper holes of the pipes that were used as poles, otherwise water and snow will get into them, and this will negatively affect their condition and service life.
Canned mesh is used for a wide variety of purposes. Of these, for example, common options such as:
Construction of enclosures for animals. It can be not only dogs and pets, but also any other species of animals. That is why corrugated mesh is often used in zoos and protected areas.
Sifting building materials. Thanks to such a grid, various loose and clay materials are easily and quickly cleaned of stones, debris and other excess impurities.
Reinforcement of various structures. Canned mesh concrete is a heavy-duty construction that is used in the construction of houses, highways and other facilities.
For guard. Cabins of vehicles and machinery, protection of window structures and various equipment, fencing of agricultural land and other places that need special protection.
Industry. Separation of rocks and other hard materials, additional protection for machine tools and other equipment, strengthening of mines and mountain slopes, and the like.
But this is only a small part of a really wide scope of use! The strength, durability and other operational advantages of the kanilirka do not leave any chance for other building materials and fencing in their price category.
Specifications and Benefits
Before choosing and buying canned mesh, companies offer consumers to find out the undeniable advantages of corrugated (canned) mesh. There are many benefits, including:
High strength. There are no welded joints in the structure, and therefore its strength exceeds the performance of any type of fence. It is almost impossible to break it without the use of heavy tools, which not everyone has.
Range. Most companies offer a wide range of sizes and other specifications. This allows you to balance between the desired diameter, height, width, length and other extremely important characteristics.
Corrosion resistance. Galvanized coating - reliable protection against corrosion for decades. No weather conditions will interfere with your fencing! The processing procedure is carried out in two stages, guaranteeing the reliability of the galvanized coating and 100% compliance with the criteria declared by the manufacturer.
Harmonious appearance. For aviaries, country houses and vegetable gardens, such a fence would be the best option. It is not only durable, but also discreet enough that it fits into the surrounding surroundings.
Versatility. Relief mesh can be used anywhere. Production of enclosures, fences, various elements of decor and landscape, landfills, containers, protection covers for equipment and many other things.
You will be able to buy the Crimped mesh mesh 100x100mm from us at the most favorable price in Ukraine. A wide range allows us to quickly and efficiently fulfill any orders, helping you to complete any construction work on time.
