-1200x900.jpg)
Stainless steel is used today in many industries. It is indispensable in mechanical engineering, in the construction of buildings and bridges, in food / chemical production, and so on. This is because the products included in this category are made of reliable high-strength alloy . which remains resistant to various atmospheric phenomena, high humidity, strong mechanical stress, and so on.
You can view the entire range of stainless steel products on the website https://ukrstarline.ua/en/nerzhaveyushchiy-metalloprokat . The process of installing parts will depend on their configuration and purpose. At the same time, there are basic rules for installing stainless steel products that should be observed.
Features of working with stainless steel
The installation of stainless rolled metal is carried out based on the purpose of the part. Today, the category includes several tens of thousands of elements of different sizes, shapes and purposes. In addition, the rules of conduct with stainless steel will also depend on its brand.
Since different types require a certain approach and have special characteristics and properties, in order not to damage the material and prevent errors during its installation, be guided by the following rules:
- Work with clean tools . Equipment and tools, on which remains of dust, dirt, and even more so rust, should not come into contact with stainless steel.
- If you work with a sheet of metal, make sure that it is protected from excessive mechanical stress. To do this, it is recommended to glue a special plastic film or thick paper on the surface.
- Stainless steel is produced with a protective film that prevents dust accumulation, as well as mechanical defects on the surface. In no case do not remove the film before starting work on the part.
- If the processing involves the formation of welds, treat them with an pickling solution. In order to avoid the need to treat welds, shielding gas can be used beforehand.
- If, in the process of working with stainless steel, drops of building materials, such as cement, get on the surface of the part, rinse the coating thoroughly as a matter of urgency.
Features of maintenance and transportation of stainless steel
Until the moment of working with stainless steel, it is important to follow the rules for transporting rolled metal and caring for it. At the production stage, products usually meet all quality standards and norms. Parts are produced from the conveyor without defects and mechanical damage. For greater protection, manufacturers usually pack rolled metal in a special way: paper is installed between the sheets, everything is covered with waterproof packaging.
It is important that no defects occur on the surface during transport. Products should not come into contact with moisture, dirt, ultraviolet radiation. Take care of the storage of stainless steel. It is important to observe certain parameters, to exclude high humidity, pollution of the room.
In no case do not leave parts in open space to avoid the appearance of spots on their surface.
I know the rules of working with the material and the principles of installing stainless steel, you can avoid mistakes when using the part, allow it to perform its task to the maximum. Subject to the recommendations for transportation, storage and maintenance, rolled metal products will retain their integrity and functional characteristics for several decades.