Imidoflex 292 t.0.45 mm

Imidoflex 292   t.0.45 mm is a composite material, structurally made of glass fabrics for electrical purposes, laminated on both sides with a polyimide film using binders that ensure adhesive interaction at the interfaces and subsequent compression molding. Composition: polyimide film + fiberglass + polyimide film, epoxy-rubber composition.

Application: Interlayer gaskets for low-voltage electrical machines, wedge-cover gaskets.

Groove insulation of electrical machines.

Imidoflex is a material that is part of a system of composite materials made on the basis of a polymer film. Such materials are a polymer combined with another material in several layers. The following materials are used as auxiliary materials:

     materials made from synthetic and cellulose fibers;

     glass cloth;

     electrical cardboard;

     paper made from aromatic polyamide fibers.

Materials based on polyamide film have high strength and rigidity and are widely used as insulation.

Imidoflex 292

Imidoflex consists of fiberglass, covered on both sides with polyamide film. The main properties of the material are:

     high resistance to current;

     resistance to high temperatures.

Most often used as a groove insulating layer in machines operating in heat resistance classes C and H (temperatures equal to +180 and +200 degrees). It is used in the production of transformer and electrical machines, and also as an analogue of plenkosludinite in production.

We offer to buy imidoflex that complies with GOST 27386, which has excellent mechanical characteristics. We present to your attention imidoflex 292 of high quality at a low price, supplied directly from the manufacturer.

Imidoflex of various thicknesses (from 0.13 to 0.50 mm) is produced in the form of sheets or rolls.

ADVANTAGES OF IMIDOFLEX

  Good flexibility and strength

  Excellent electrical insulating properties

  Large work resource

  High reliability

The main general purpose of electrical insulating films · electrical cardboards · glass fiber films is to create thin but effective electrical insulation. These materials prevent interturn/interlayer short circuits in transformers ✲ electric motors ✲ generators; serve as protection for the walls of • housings of electrical devices, machines • devices from the penetration of electrical potentials into them in any way.

Another purpose of insulating films is to protect electronic components and compressors operating in liquid aggressive environments. For example, in the freon of an air conditioner or refrigerator.

Insulation is the process of creating an insulating layer on a winding or device. Application of insulation can occur either automatically (mechanical insulation) or manually (manual insulation). When applying insulating films, it is important to avoid places where the layers do not overlap. It is more likely that an electrical breakdown - a short circuit - will occur in this place. A short circuit will eventually lead to failure of the insulated electrical device.

In addition to interlayer insulation of electric motors, polyimide films are used for wrapping wires and cables, as flexible printed circuit boards with applied conductive tracks, and when winding turns on chokes using ferrite cores with sharp edges to protect the wound wire.

  From us you can buy Imidoflex 292  t.0.45 mm at the best price in Ukraine. A wide range of products allows us to quickly and efficiently fulfill any order, helping to complete any construction work on time.