Mica tape Flooterm 0.08mm

Flooterm 0.08mm mica tape is an insulating material that is used to insulate electric motors, high-voltage machines, and devices. There are many variations of the name of this electrical insulating material: mica tape, mica tape.

The assessment of the qualitative characteristics of the insulation systems of electrical machines should be carried out by measuring specific indicators under the conditions of an electric machine actually operating under maximum load, that is, in the presence of temperatures of possible overheating of machine components (magnetic system coils, armature sections, etc.) up to 200 0С and possible power surges.

In the manufacture of mica tapes, paper made from natural phlogopite mica is used without destroying its crystal structure, which ensures increased dielectric properties of the tapes.

Mass fraction of components in tapes -%:

mica not less than 30 (mica is not calculated for LSPM tapes);

binder: 10 to 40;

volatile substances: no more than 2 (for LSPM n / b 1.5);

Mica tapes are supplied in rollers with a diameter of 100 ± 10 mm, widths of 10, 15, 20, 23, 25, 30 and 35 mm with a maximum deviation of ± 1 mm, wound on a rigid sleeve with an inner diameter of 35 ± 3 mm. By agreement with the consumer, it is possible to manufacture rollers of other widths. The guaranteed shelf life is 6 months from the date of manufacture. Transport packaging complies with GOST 26103-84.

Tapes designation:

LS - mica tape;

K-110 grade of epoxy-polyester compound, heat resistance class F-H;

У - unification, which determines the use of the impregnating composition of the F-H class;

M - modification of the impregnating composition of the F-H class;

K - modification of the class H impregnating composition;

EP-934 is a brand of epoxy-polyester binder.

    You can buy Flooterm 0.08mm mica tape from us at the most favorable price in Ukraine. A wide range of products allows us to quickly and efficiently fulfill any orders, helping to complete any construction work on time.