Corner rolled galvanized 55x55x5 mm

Rolled galvanized angle 55x55x5 mm is a rolled metal product that is used in many industries: in mechanical engineering, this type of rolled metal is widely used in construction to reinforce monolithic structures in high-rise structures and buildings for various purposes, ceilings, and coatings. Due to its low weight and high strength, it is used wherever it is necessary to provide high rigidity with a low total weight of the structure. The classification of corners depends on the purpose, material, manufacturing method, and the shape of the finished product.

Mode of production:

1. hot-rolled - the billet is rolled through the shafts of the rolling mill, and under pressure a corner of the desired size and shape is formed. Most of all, it is used for the manufacture of various metal structures and joints;

2. bent - made from a sheet of cold-rolled or hot-rolled metal on special machines that bend the shape of the corner.

Hot rolled angle has higher strength and weight compared to bent angle.

Section view:

- equal-shelf metal corner - the width of the shelf can vary from 2 cm and above. The size of the corner corresponds to the number of the corner. (in millimeters)

- unequal metal corner.

There are two types of materials from which the corner is made:

- a steel corner from steel of ordinary quality;

- a corner steel from steel of the increased durability.

        You can buy a rolled galvanized corner 55x55x5 mm from us at the best price in Ukraine. A wide range of products allows us to quickly and efficiently fulfill any order, helping to complete any construction work on time.