Hinged mesh galvanized 1016 mm for autobahns, fields, hunting grounds and more - a new trend in fencing. #1 fencing worldwide.
Advantages:
low price
simple installation
strength
Technical features: mesh made of galvanized wire, with a hinged joint and a mesh that changes in height (mesh size decreases from the top edge of the mesh to the bottom).
Scope of application: used for fencing roads and railways, forest lands, pastures, hunting grounds, sanitary zones and other areas. Hinge knot netting is widely used by agricultural enterprises, and is also often used in the home as a fence for poultry.
Savings: variable mesh pitch reduces the cost of products, due to which it is a competitive substitute for chain-link mesh, and, at a price, it turns out even cheaper.
The installation of a hinged mesh for autobahns and agricultural areas requires a much smaller number of poles (poles can be placed every 8-12 meters), which greatly facilitates installation and reduces the cost of fencing.
The hinged mesh is a carbon steel wire product. Characterized by increased lightness and strength. Available in rolls of various lengths.
The name "hinged" refers to the method of connecting the wire mesh elements to each other. For fastening the transverse and longitudinal wires, the DFL hinged assembly is used. This fixation favorably distinguishes the hinged network from the chain-link, welded and twisted mesh.
The standard length of wire rods is 1-2.5 m. The diameter of the wire used is in the range of 1.8-2.5 mm.
One of the main features of the grid is the progressive cell height. The vertical side of the cells increases in the direction from the bottom edge of the grid to the top. The horizontal side remains unchanged and is usually between 150 and 300 mm.
The better galvanized
The use of galvanized wire during the production process significantly affects the performance of the hinged mesh.
Galvanized mesh is less prone to corrosion, more durable. Service life increases up to 25 years (depending on operating conditions).
Areas of application of nodal materials: for fences and others
Hinged mesh is used for the manufacture of functional, high-quality, inexpensive and durable fences. Mesh fences are widely used and are actively used by individuals and companies to protect territories. The DFL grid has proven itself well in the following areas:
Agriculture:
restriction of the movement of domestic animals (pens, pastures);
fencing of gardens, fields with vegetable crops to protect against pests.
Private sector:
fencing of the adjacent territory and subsidiary plots;
support for climbing and creeping plants (including vineyards);
enclosures for keeping pets.
Urban areas:
fencing of open areas for various economic purposes (for example, fencing of technical territories, construction sites, sanitary zones);
sports grounds;
enclosures in dog kennels.
Restriction of movement of wild animals:
fencing of busy highways and railways;
restriction of the territories of reserves, wildlife sanctuaries, forestries, hunting grounds.
The versatility of the mesh is due to its operational characteristics, ease of working with the material, attractive price for the construction of fences of short and long lengths.
Advantages
The high interest of consumers in the material is associated with the obvious advantages of the hinged mesh in relation to analogues:
Hinge knot. Due to the features of the DFL node, the entire mesh acquires mobility relative to the tension axis. This feature allows you to simulate various options for fencing designs.
The hinged grid is not subject to deformation. Under mechanical action, it quickly returns to its shape, which is explained by its high tensile strength.
The process of installing a hinged material fence is simple and hassle-free.
Attractive price. The design features of the grid allow you to save on raw materials, reducing the cost and consumer price of the material.
Savings on additional materials. Installation of a fence made of DFL mesh allows you to reduce the number of supports used by up to two times.
Progressive cells increase the functionality of the fence:
small cells near the surface limit access to medium-sized animals;
a large mesh in the upper part of the fence significantly lightens the weight of the product, preventing deformation and increasing the service life.
Higher protective properties of the metal compared to welded versions, where the anti-corrosion coating is damaged at the points of contact with welding.
The use of larger diameter wire along the horizontal edges of the mesh increases the stability of the finished fence.
Production and equipment
industrial pThe production of hinged mesh in large volumes is carried out on automated machines. The general scheme of the process is as follows:
The wire feed into the machine is automated directly from the wire coils.
The ends of the wire are threaded into the machine at intervals equal to the mesh width. The width of the future roll depends on the number of coils in the work.
The machine performs interlacing of horizontal and vertical wires.
The finished mesh is wound on a special drum.
The dimensions of the equipment can vary, occupying different square meters. The dimensions of the machine directly depend on the width of the mesh produced. All stages on a single machine are performed by one operator, which significantly reduces the cost of the final product.
Hinged mesh - how to check the quality and where to use?
Hinged mesh with galvanized surface is a steel wire product. The diameter of the bars can vary from 1.8 to 2.5 mm, and their length - from 1 to 2 m. It is called hinged due to the method of connecting the elements to each other.
Mesh construction and application
There is one feature in the design - the height of the cells is not the same. In production, the step width is 150 mm, but the higher from the ground, the larger the squares become. This measure saves material and significantly reduces the cost of fencing. The mesh can be stretched during installation, thus increasing the distance between the supports and reducing their number. In addition, small animals will not be able to climb through this mesh near the ground, and large ones will be stopped even by the maximum allowable size of the cells.
Sometimes the owners of such a fence have a question regarding zinc processing. After all, if it is not carried out, then the cost of the material can be further reduced. Of course, steel wire itself has good strength characteristics. Zinc really has no effect here, it has a slightly different purpose. Thanks to this treatment, the wire acquires good anti-corrosion properties, which means it becomes more durable. No wonder the service life of such a barrier can be 25 years.
In most cases, galvanized mesh with a special hinged joint is used in various branches of agriculture. That is why it is sometimes called the forest. People who work in this area take such a net when they need to restrict the movement of pets. It can also be used when setting up barriers on the territory of schools, railways, highways, as well as forestries. In no case should a hinged mesh be used to protect any object, for this it is not sufficiently reliable.
The product is installed with rolled type poles, which are made of steel galvanized on both sides. The grid is fixed on the supports using a special locking connection. Thanks to all this, the design is characterized by excellent rigidity.
Hot dip galvanizing is the largest scale method. The coating is applied to the wire by immersing it in a bath of molten zinc for a short period of time. The melt temperature must be at least 500 °C. Before immersion, the wire must be prepared by heating it. After the bath, the product is sent to a special centrifuge, where it is cooled and excess coating is removed from it. This method is well spread due to the fact that it creates a double protective layer that protects against corrosion for many years. It is hot galvanizing that is most often used for processing steel in the manufacture of forest mesh.
You can buy galvanized hinged mesh 1016 mm from us at the best price in Ukraine. A wide range of products allows us to quickly and efficiently fulfill any order, helping to complete any construction work on time.
