Ferromanganese FMn95

Brand: Украина

Product Code: 06580

In Stock

290.00 грн

/kg

Found this product cheaper?

Return guarantee Free exchange/return of goods within - 1 day Official warranty from the manufacturer - 12 months Payment Cash, Visa/MasterCard, payment via Privat24, non-cash settlement

Ferromanganese FMn95 is a type of manganese ferroalloys, with a mass fraction of manganese not less than 95%. In this alloy, the presence of slag or sand impurities is not allowed, only an oxide film and a trace of non-stick materials are allowed. Ferromanganese 95 is used for smelting stainless steel. Nickel is usually used for this, but this metal is quite expensive and is in short supply, so the use of a more affordable alloy is encouraged. Ferromanganese gives the finished product additional wear resistance and increases tensile strength.

Specifications:

GOST 6008 - 90

Brand: FMn95

Mn content: 95%

Particle size: 10 - 50 mm

You can buy FMn95 Ferromanganese from us at the most favorable price in Ukraine. A wide range of products allows us to quickly and efficiently fulfill any orders, helping to complete any construction work on time.

The main thing

Material

iron alloys with other elements (Cr, Si, Mn, Ti, etc.)

View by manufacturing method

Produced from ores or concentrates in electric furnaces, metallothermic method, blast furnace method, electrolytic method, or special methods (in smelting mines (furnaces)

Chemical composition

Mn content: 95%

Type by purpose

Ferrotungsten is used in ferrous metallurgy for alloying steel and alloys. Ferromolybdenum is used instead of pure molybdenum when alloying steel, cast iron and alloys. In ferrous metallurgy, ferrovanadium is used in alloying steel, alloys and cast irons to obtain a fine-crystalline structure, increase the impact strength and resistance of steel against alternating loads, and increase hardenability. Nitrided ferrovanadium is intended for alloying high-speed, low-alloy, stainless, frost-resistant steels with vanadium and nitrogen. Ferroniobium is used in the smelting of structural steel and heat-resistant alloys.

A type

Ferroalloys

The country of manufacture

Ukraine

No questions about this product, be the first and ask your question.

Type of ferroalloy	Bulk density, t/m³	Weight of 1 m³, kg
Ferromanganese	3,0–3,8	3000–3800
Ferrosilicon FS45	2,2–2,8	2200–2800
Ferrosilicon FS75	2,0–2,6	2000–2600
High-carbon ferrochrome	3,5–4,5	3500–4500
Low-carbon ferrochrome	3,2–4,2	3200–4200
Ferrovanadium	3,5–4,8	3500–4800
Ferromolybdenum	2,5–3,5	2500–3500
Ferrotungsten	7,0–9,0	7000–9000
Ferrotitanium	2,0–3,0	2000–3000
Ferroniobium	3,5–4,5	3500–4500
Silicomanganese	3,0–4,0	3000–4000
Silicocalcium	1,8–2,5	1800–2500