Solder POS 60 without flux 2.0 mm 0.5 kg

Brand: Европа

Product Code: 06528

In Stock

960.00 грн

/kg

Found this product cheaper?

Return guarantee Free exchange/return of goods within - 1 day Official warranty from the manufacturer - 12 months Payment Cash, Visa/MasterCard, payment via Privat24, non-cash settlement

POS 60 solder without flux 2.0 mm 0.5 kg is used in microelectronics, electrical engineering for soldering boards, microcircuits; when installing electrical and radio equipment.

The non-corrosive SW26 flux does not require removal of solder residues. Fluxes dissolve and remove oxides and impurities from the surface of the brazed joint. In addition, during brazing, they protect the surface of the heated metal and molten solder from oxidation. All this contributes to an increase in the spreadability of the solder, and, consequently, to an improvement in the quality of the solder.

Specifications:

GOST 21930 - 76

Brand: POS 60

Melting point: 183 - 190 ºC

Sn content: 59 - 61%

Pb content: 39 - 41%

Flux: SW 26 flux 2.5%

You can buy POS 60 Solder from us without gumboil 2.0 mm 0.5 kg at the most favorable price in Ukraine. A wide range of products allows us to quickly and efficiently fulfill any orders, helping to complete any construction work on time.

The main thing

Diameter

0,5-3мм

Material

Alloys based on tin, lead, cadmium, copper, nickel, silver and others are used

View by manufacturing method

cold and hot deformation

Chemical composition

Sn content: 59 - 61%, Pb content: 39 - 41%

Type by purpose

Lead-free Sn/Ag solder is characterized by good current conductivity, low cost, and reliable performance characteristics. Used for wave soldering of printed circuit boards, resistant to electricity, which is suitable for copper wires. Due to its high fusibility, it is an ideal material for high temperature soldering. Pewter alloy is a very ductile material; it can be used to cast products that are replete with the smallest details. POS 30 solder is used in the cable industry, and is also used for tinning and soldering zinc sheets. LK 62-0.5 solder is used for soldering brass, copper, carbon steel, etc. It is often used in cases where there is a need for the production of various welded structures and products. The main area of use of the copper-phosphorus alloy PMFOTsr is soldering of copper and its various alloys (nickel silver, brass, bronze). POVI solder is used as a protective solder for various solder joints. It is in demand in radio electronics, because it is in this area that it is necessary to provide products with the required anti-corrosion and anti-friction characteristics, coupled with a simple and trouble-free soldering process

A type

Solders

The country of manufacture

Ukraine

No questions about this product, be the first and ask your question.