Brass strip 2×20 mm LS59, L59, LS63, LZhMts 59-1 GOST 5362-78 is a variant of sheet metal having a rectangular section and produced by cold or hot method from copper alloys.
Brass strips are used in auto electrics, telecommunications, electronics and electrical and radio engineering. They are used to make resistors, washers, they are used in the manufacture of equipment for the distribution of gas and water, capacitors and relays. The addition of additional elements to the alloys improves their resistance to corrosion, which makes them suitable for use in the shipbuilding and chemical industries. A brass strip is suitable for small parts, the shape of which is quite complex. It is used to make furniture and upholstery for buildings inside and out.
Brass strips have increased or normal manufacturing accuracy and varying degrees of softness, and can be characterized by antimagnetic properties.
Brass strip: advantages
• Resistance to corrosion processes, the influence of aggressive chemicals based on salts, acids and alkalis, sea water and liquids whose composition is similar to it;
• Elasticity;
• Durability;
• Conductivity of thermal energy and electric current, the ability to use as a link in thermal and electrical circuits;
• Presentable appearance;
• Ease of processing by stamping, welding, drawing, forging, cutting, bending and other methods;
• Favorable rental price.
A brass strip is a so-called semi-finished product, which in most cases is subject to additional processing and preparation for final consumption (installation on various objects, for example). The material looks like a tape wound on a small reel. The width of the layer is uniform in different areas along the entire length.
Application
The scope may vary. Most often the material is used in the following industries:
furniture production (manufacturing of connecting sections, as well as their elements, decorative layers);
printing business (creation of elements for stationery, etc.);
radiator outlet (recommended for work with seams and other areas of heating devices that use water and are potentially susceptible to corrosion);
production of decorative elements for interior decoration (elements of signs are made from brass strips of 10 mm, which can be preliminarily engraved or processed in other ways).
Widespread use is due to its advantages, including flexibility, ductility, resistance to damage during processing.
Features and types
The material is produced by cold rolling. This technology opens up wide possibilities in the selection of the width and length of products. The whole sheet is subsequently “unwound” and cut into the desired size sections, and then sent for processing and preparation for the final application.
Brass strips l63 are classified in the following areas:
length. Available in dimensional and non-dimensional versions. The standard length on one reel is about 1-2 meters, but you can focus on the wishes of the customer and select the option that is convenient for him;
softness. You can buy in St. Petersburg not only in soft or hard forms, but also in a semi-solid state, as well as "especially hard". Each of the presented options is focused on solving a certain range of tasks within the framework of production;
mode of production. The most common manufacturing technology involves cold rolling. However, there is another option - hot rolling, which allows you to get a product with different technical characteristics;
appointment. There are brass strips 30 mm for general purposes (their prevailing quantity is on sale). Specific materials are also presented, the composition of which may vary depending on the alloy used. For example, this is true in the production of parts for electrical engineering;
surface features. It can be a polished tire or a material that is not subject to pre-treatment;
accuracy. Normal, elevated and high - in total, these three groups can be distinguished in the presented category. More often you can buy a brass strip at retail in the normal version.
The use of brass strips is very extensive, someone makes inserts into natural oak parquet on the floor, use them on the walls as a vertical decor, close the joints of wall panels and mirrors, the ceiling is no exception, but most often they decorate furniture.
In terms of their physical and mechanical properties, brass strips are superior to copper strips in terms of strength, wear resistance, lower coefficient of friction and better appearance.
Common properties of brass strips:
excellent anti-corrosion performance,
strength under static and dynamic loads,
pliability to mechanical types of processing,
excellent appearance, both in normal and polished condition.
The brass strip serves as a semi-finished product in the manufacture of electrical products, parts produced by stamping, it is well engraved and cut, which makes it notinterchangeable in the production of signboards, signs, plates, advertising structures. Due to its weather resistance, it is used in shipbuilding, mechanical engineering, where it is used in details, and as a decorative element. In decoration, they are used for facing cornices, window and door openings, and various structural solutions are made.
Brass is classified according to the following types:
soft;
semi-solid;
hard;
especially hard.
The soft brass bar is more suitable for use in more acceptable operating conditions. For serious industrial enterprises, it is better to use solid or extra hard brass strips. You can also buy products based on manufacturing accuracy (normal or increased) and according to the presence/absence of additional features, such as anti-magnetic properties.
You can buy Brass strip 2×20 mm LS59, L59, LS63, LZhMts 59-1 GOST 5362-78 from us at the best price in Ukraine. A wide range of products allows us to quickly and efficiently fulfill any order, helping to complete any construction work on time.
