Brass hexagon LS-59, L-63 46 mm is a bar, the cross-section of which is a hexagon. Hexagonal rods are mainly made from brass alloys of two grades LS59-1 and brass L63 in accordance with GOST 2060-2006.
The production of brass rods is carried out by two methods - cold and hot deformation, which makes it possible to obtain two types of material: hot-rolled brass hexagon (pressed) and calibrated (drawn).
Brass hexagons are made from different brands of brass, the zinc content of which ranges from 5 to 45%. Brass, in comparison with pure copper, is characterized by a higher resistance to corrosion processes. In addition, zinc is cheaper than copper, so the price of brass hexagons is much lower in comparison with copper ones. The zinc content in brasses has a beneficial effect on the antifriction, mechanical and technological characteristics of the assortment.
Brass hexagon is characterized by high thermal conductivity and corrosion resistance. The assortment lends itself well to mechanical processing, both hot and cold, rods can be cut, milled, stamped, while the resulting parts will be strong and reliable.
Brass hexagons are used in construction, electrical engineering for the production of parts, mechanical engineering, and the chemical industry. Nuts, bolts and other fasteners, parts of valves in gas and water circulation systems, decorative parts, as well as matrices for printing are made from this rolled metal product.
You can buy the Brass hexagon LS-59, L-63 46 mm from us at the most favorable price in Ukraine. A wide range of products allows us to quickly and efficiently fulfill any orders, helping to complete any construction work on time.
No questions about this product, be the first and ask your question.