Copper bar M1, M2 50 mm

Copper rod M1, M2 50 mm is a solid product of rolled metal uniform along the entire length of the section. In accordance with the requirements of GOST 1535-2006, a round, square, and hexagonal section bar is manufactured by cold rolling or hot pressing (only for a round bar) from copper: M1 (r, f), M2 (r) or M3 (r) with the composition of impurities regulated by the requirements of GOST 859-2001.

Due to the unique chemical and physical properties of the metal, the copper rod is widely used, primarily as a semi-finished product for further processing and manufacture of parts for various purposes.

High corrosion resistance and low chemical activity of the metal make copper bars an irreplaceable material in the manufacture of valves in water and gas supply systems. Copper does not pose a threat to the environment, therefore, parts from this type of rolled metal are widely used in the creation of various equipment, including food equipment.

An important factor is the simplicity and manufacturability of metal processing - copper can be easily drilled, milled, bendable, forged, stamped, welded, therefore, parts made from copper bars are extremely in demand in the automotive industry, mechanical engineering, shipbuilding, and other industries.

Manufacturing methods subdivide copper rods into pressed (hot deformation) - (D) and drawn (cold-rolled or cold-worked) - (D).

The cross-section of the rods being produced subdivides them into square (KB), round (KP) or hexagonal (WG).

According to the manufacturing accuracy, it is customary to distinguish between bars of normal (N), increased (P) and high (B) accuracy.

The following criteria are considered to be the state of the metal, which can be soft (M), hard (T) and semi-hard (P), as well as the length of the bar segments: off-gauge (ND) and multiple measured (CD) lengths.

Another classification feature is considered to be special conditions, for example: an increased state of plasticity (L, F and U), types of winding with coils (BT or BU), for processing by machines (AB) and others.

    You can buy a Bar of copper M1, M2 of 50 mm from us at the most favorable price in Ukraine. A wide range of products allows us to quickly and efficiently fulfill any orders, helping to complete any construction work on time.