Titanium card ВТ6 360-450х610х2,5 mm - one of the types of titanium rolled products, in appearance - a rectangular sheet (narrow metal tiles) of various thicknesses. Unlike titanium sheets, titanium cards are characterized by smaller dimensions. These are, in a way, cut sheets, which, often, due to their smaller size, are more convenient to use.
The thickness of titanium cards is from 0.6 to 35 mm, other options are possible. Dimensions - 330x50, 330x610, 410x570, 410x640, 500x800, 500x1000, 610x790, 360x610, 460x610, 495x1040, 500x700, 500x800, 190x320, 9 50x1450 mm.
This type of titanium rolled products, such as cards, is produced in accordance with the requirements of GOST 22178-76, GOST 19807-74 or OST 1 90013-81. The first standard defines the overall dimensions of products, their thickness, marking, mechanical properties, cutting features, appearance and quality of finish, as well as the rules for product acceptance, storage, transportation and packaging conditions.
You can buy titanium cards most often, made in the following ways:
- annealed with subsequent straightening and ironing;
- annealed.
Titanium cards are produced in the same way as sheets - by rolling. The most popular are cards BT1-0, BT6.
It is used in various industries due to its unique properties and high corrosion resistance. High strength, resistance to both high and low temperatures is maintained for the entire period of operation of the product. The surface of the rolled product fully complies with the GOST conditions - clean, without mechanical damage, delamination, tears.
Titanium card - one of the types of titanium rolled products, in appearance - a rectangular sheet (narrow metal tiles) of various thicknesses. Unlike titanium sheets, titanium cards are characterized by smaller dimensions. These are, in a way, cut sheets, which, often, due to their smaller size, are more convenient to use.
This type of titanium rolled products, such as cards, is produced in accordance with the requirements of GOST 22178-76, GOST 19807-74 or OST 1 90013-81. The first standard defines the overall dimensions of products, their thickness, marking, mechanical properties, cutting features, appearance and quality of finish, as well as the rules for product acceptance, storage, transportation and packaging conditions.
GOST 19807-74 (currently GOST 19807-91) regulates the chemical composition of titanium alloys (wrought) and titanium. In accordance with GOST 24231-80, samples are taken and prepared for analysis for chemical. compound.
The main advantages of titanium and rolled products
- small weight of products;
- stability in aggressive conditions, resistance to moisture;
- low creep (like stainless steel);
- good ductility, extensibility, like copper;
- high thermal conductivity, which increases with increasing temperature;
- resistance to corrosion, due to the presence of a passivating protective film on the surface;
- resistance in vacuum to evaporation;
- the ability to form intermetallic compounds and demanded alloys with many elements;
- mechanical strength;
- low density - 4505 kg/m3;
- physiological inertia.
made in the following ways:
- annealed with subsequent straightening and ironing;
- annealed.
In hydrogen environments, it undergoes embrittlement. It is cut quite hard, it sticks to the tool, therefore, to cut cards, it is necessary to strictly follow the technology, use lubricants, carry out the cutting process itself in a special environment, or entrust the work to professionals. Cards are also welded in a protective environment.
The technical characteristics of titanium rolled products are determined not only by the properties of the base metal, but also by alloying additives that are part of the alloys and their percentage. Any element, depending on the content, has a direct impact on the properties of the finished product. Let's look at some of the most used:
- manganese - affects the ability of alloys to deform, both in a hot and cold state, increases ductility;
- aluminum - reduces the manufacturability of titanium alloys, but slightly increases their strength, positively affects the heat resistance;
- vanadium, zirconium, molybdenum - increase plasticity and strength.
Titanium cards are produced in the same way as sheets - by rolling. The most popular are cards BT1-0, BT6.
VT1-0 cards are made from technical titanium with high chemical purity. The content of the base metal is 99.24 - 99.7%, the rest is minor impurities of iron, silicon, aluminum, manganese, molybdenum, vanadium, chromium, zirconium and tin.
Plasticity of titanium cards VT1-0:
- normal;
- increased (PP);
- high (VP).
It is used in various industries due to its unique properties and high corrosion resistance. High strength, resistance to both high and low temperatures is maintained for the entire period of operation of the product. The surface of the rolled product fully complies with the GOST conditions - clean, without mechanical damage, delamination, tears.
Titan BT6
Cards made of deformablealloy VT6 with high corrosion resistance and strength are the most popular. Due to the highest quality, they are used in aircraft modeling, medicine and many other areas.
Titanium cards BT6 retain their properties and can be operated at temperatures not exceeding 450 degrees Celsius. This rolled product is often used for the production of cylinders and containers operating under internal pressure.
Due to the unique properties of titanium, rolled products, including titanium cards, are widely used in various industries and in the design of modern equipment and products. The main areas of application of cards can be considered:
- medicine - material for the production of implants, medical instruments and equipment (metal is hygienic, inert in relation to the human body);
- space industry and aviation - due to its high lightness and hardness, it is widely used as a skin for aircraft, rockets, other aircraft, equipment;
- shipping - hulls of boats, submarines, ships;
- chemical production - equipment, containers (due to high chemical passivity);
- food - equipment, utensils, containers;
- heavy industry;
- innovative projects - high-vacuum pumps, etc.
Titanium is a material in demand and has no alternative in many areas.
You can buy Titanium Card ВТ6 360-450х610х2,5 mm from us at the best price in Ukraine. A wide range of products allows us to quickly and efficiently fulfill any order, helping to complete any construction work on time.
