Return guaranteeFree exchange/return of goods within - 1 day
Official warranty from the manufacturer - 12 monthsPaymentCash, Visa/MasterCard, payment via Privat24, non-cash settlement
Caprolon (polyamide), rod, PA 6, Zellamid 202 160х1000 mm - successfully combines high mechanical strength with elasticity in a wide temperature range. Caprolon products are erosion-resistant; they work perfectly in flammable and lubricating liquids, in sea water, in organic solvents, in alcohols, alkalis and diluted acids. Caprolon parts are durable and absorb shock loads remarkably, due to which they are used to manufacture bogies, housings of various mechanisms, gearbox drives, conveyors, hubs, gears, sprockets and many other units in which there are shock loads on the body of the product or elements.
The main thing
View by manufacturing method
First, granulated polyamide is fed into an extruder, where it melts at a temperature of 220–280°C. The melt is then forced under pressure through a forming die with a round opening. A continuous rod of a specified diameter (usually between 10 mm and 200 mm) is formed at the exit. After this, the hot rod passes through a water bath or air cooling system to harden and maintain its shape. The rod is then cut to the required length and annealed to relieve internal stress. It is sometimes further calibrated or surface ground. For rods with larger diameters or special properties, mold casting followed by machining is used.
Chemical composition
Structural polymer obtained in the process of anionic polymerization of caprolactam, carried out directly in the form in the presence of alkaline catalysts and activators.
Type by purpose
Caprolon is widely used in mechanical engineering and shipbuilding as bearings, gears, bushings, shafts, and rollers. Products made from caprolon replace bronze, brass, and babbitt. Caprolon successfully combines high mechanical strength with elasticity over a wide temperature range. Products made from caprolon are erosion-resistant; work well in fuels and lubricants, in sea water, in organic solvents, in alcohols, alkalis and diluted acids. Parts made of caprolon are durable and absorb shock loads remarkably, which is why they are used for the manufacture of trolleys, housings of various mechanisms, gearbox drives, conveyors, hubs, gears, sprockets and many other units in which there are shock loads on the product body or elements. Possessing a low coefficient of friction, products made from Polyamide are quickly and easily installed instead of steel and bronze parts.
A type
Caprolon (polyamide) rod
Dimensions (width, length)
1000 mm
Additional services
Cutting is carried out according to the client's order and packaging of products according to the client's orderSent by any carriers in Ukraine
The country of manufacture
Ukraine
No questions about this product, be the first and ask your question.
