trubka-200x200.jpg "Kaprolon (polyamide) tube")
Kaprolon in Ukraine
It is a high-strength polymer material that has good performance characteristics, including abrasion resistance, impact resistance, etc. The range of application is quite wide. It is very important to go to a trusted place for purchase in order to count on the purchase of certified products. We offer polyamide, which has all the necessary quality certificates. It is produced in several versions, which allows the client to always find the most successful one. You can first study all these options in a convenient catalog, as well as get tips from managers. The cost is at an affordable level, and the quality of service is always pleasantly surprising.
Features and properties of polyamide
The polymer material appeared relatively recently, but has already gained particular popularity due to its unique properties. It is distinguished by good indicators of hardness, frost resistance, elasticity in compression. The optimum operating temperature for the material is from -40 to +80 degrees.
It is produced by polymerization of lactam at low temperatures. The process uses alkaline type catalysts and a variety of activators. The scope of application is extensive due to the main characteristics, including anti-friction and structural. The material is resistant to oils, alcohol, esters and other similar substances, which further expands the scope. Excellent dielectric properties are also important, which allows it to be used as insulators.
Application
Multifunctional material can be used equally successfully in a variety of areas, among which industry and construction are considered the main ones. The production of a variety of parts is available from it. Among the most demanded in the modern market are:
- Bushings.
- Plain bearings.
- Transporters.
- Wheel hubs.
- Gear drives.
- Friction nodes.
- Fittings.
It is useful in the electrical and radio industry, in the manufacture of insulating products and in many other places.
Benefits of polyamide
If it is a certified material, it will definitely have some important advantages:
- Ease of processing and excellent performance.
- High level of resistance to various external influences.
- Resistance to friction, wear.
All these qualities have a positive effect on the success of application in specific areas.
Buy caprolon
It is inexpensive to purchase it very simply in different variations of execution, including a sheet, a rod, etc. You can place an order with us, spending a minimum amount of time studying the main characteristics presented in a convenient catalog. You can always count on the support of managers who will help you not to make a mistake in making a decision regarding the choice of polyamide in the right form, as well as tell you how to organize payment, delivery and other nuances. The cost always surprises from the best side, and delivery is organized by a convenient method from the available carriers at the moment.
Questions & Answers
Nylon rods are made of PA12, PA66, PA610, PA6-B, PA6-K, PA6-M, PA6-LS, PA6-MG, PA6-MDM, and PA-6.
Nylon sheets are made of Nylon-B, Nylon-A, PA6G, and PA-6.
Nylon tubes are made of PA6-G, PA-66, PA-12, PA-6, PA-6-U, PA-610, PA-6-MDM, and PA-6-MG.
The main GOST standard for nylon rods is:
GOST 10589-87 - technical specifications for block polyamide 6. This standard specifies chemical resistance, product acceptance, testing methods, marking, processability, heat resistance, physical and mechanical properties, moisture absorption, electrical properties, dimensions, appearance requirements, antifriction properties, materials of manufacture, and the application area of the rods.
The main technical specifications for nylon sheets are:
TU 6-05-988-87 - technical specifications governing the manufacture of block polyamide 6. They cover: quality control, chemical resistance, mechanical processing, appearance requirements, dimensions, antifriction and electrical properties, materials of manufacture, application area, and the physical and mechanical properties of the sheets.
The main technical specifications for nylon tubes are:
TU 2224-001-78534599-2006 - technical specifications governing the production of nylon tubes. This document applies to nylon blanks in the form of tubes, bushings, plates, and other semi-finished products. The standard covers product acceptance, labeling, inspection methods, machinability, temperature characteristics, chemical resistance, types of manufactured products, electrical properties, application areas, antifriction properties, physical and mechanical properties, and appearance requirements for the tubes.
Table of weights of nylon rods
| Diameter, mm | Weight, kg/m |
| 10 | 0,09 |
| 12 | 0,13 |
| 15 | 0,2 |
| 20 | 0,36 |
| 25 | 0,56 |
| 30 | 0,81 |
| 35 | 1,11 |
| 40 | 1,45 |
| 45 | 1,83 |
| 50 | 2,26 |
| 60 | 3,25 |
| 70 | 4,43 |
| 80 | 5,78 |
| 90 | 7,31 |
| 100 | 9,03 |
| 110 | 10,92 |
| 120 | 12,99 |
| 130 | 15,25 |
| 140 | 17,69 |
| 150 | 20,32 |
| 160 | 23,12 |
| 180 | 29,25 |
| 200 | 36,13 |
| 220 | 43,72 |
| 250 | 56,46 |
| 300 | 81,3 |
Table of weights of nylon sheets:
For sheets measuring 1000×1000 mm
| Sheet thickness, mm | Sheet weight, kg |
| 1 | 1,15 |
| 2 | 2,3 |
| 3 | 3,45 |
| 4 | 4,6 |
| 5 | 5,75 |
| 6 | 6,9 |
| 8 | 9,2 |
| 10 | 11,5 |
| 12 | 13,8 |
| 15 | 17,25 |
| 20 | 23 |
| 25 | 28,75 |
| 30 | 34,5 |
| 40 | 46 |
| 50 | 57,5 |
| 60 | 69 |
| 70 | 80,5 |
| 80 | 92 |
| 100 | 115 |
Table of weights of nylon tubes
| Outside diameter × inside diameter, mm | Weight of 1 m, kg |
| 20 × 10 | 0,27 |
| 25 × 15 | 0,36 |
| 30 × 20 | 0,45 |
| 40 × 20 | 1,08 |
| 40 × 30 | 0,63 |
| 50 × 30 | 1,44 |
| 50 × 40 | 0,81 |
| 60 × 40 | 1,81 |
| 60 × 50 | 0,99 |
| 70 × 50 | 2,17 |
| 80 × 60 | 2,53 |
| 90 × 70 | 2,9 |
| 100 × 80 | 3,26 |
| 120 × 100 | 3,98 |
| 150 × 120 | 6,51 |
| 200 × 160 | 11,59 |