trubka-200x200.jpg "Kaprolon (polyamide) tube")
trubka-228x228.jpg "Polyamide pipe 50x20x1000 6SA")
trubka-80x80.jpg "Kaprolon (polyamide) tube")
Questions & Answers
Caprolon tubes are produced in the following grades: PA6-G, PA-66, PA-12, PA-6, PA-6-U, PA-610, PA-6-MDM, PA-6-MG.
International standards:
ISO 604 — Determination of compressive strength;
ISO 62 — Determination of water absorption;
ISO 179 — Determination of impact strength;
ISO 178 — Flexural testing of plastics;
ISO 527 — Determination of mechanical properties of plastics.
GOST standards:
GOST 15139-69 — Determination of the density of plastics;
GOST 15088-2014 — Method for determining the softening point of plastics;
GOST 4670-2015 — Determination of the hardness of plastics;
GOST 4650-2014 — Determination of water absorption of plastics;
GOST 4648-2014 — Determination of the impact strength of plastics;
GOST 11262-2017 — Tensile testing method;
GOST 12020-72 — Method for Determining Resistance to Chemical Environments;
GOST 1768-83 — Methods for Determining the Dimensions of Plastics;
GOST 10589-87 — Technical Specifications for Polyamide.
| Outside diameter × inside diameter, mm | Weight of 1 m, kg |
| 20 × 10 | 0,27 |
| 25 × 15 | 0,36 |
| 30 × 20 | 0,45 |
| 40 × 20 | 1,08 |
| 40 × 30 | 0,63 |
| 50 × 30 | 1,44 |
| 50 × 40 | 0,81 |
| 60 × 40 | 1,81 |
| 60 × 50 | 0,99 |
| 70 × 50 | 2,17 |
| 80 × 60 | 2,53 |
| 90 × 70 | 2,9 |
| 100 × 80 | 3,26 |
| 120 × 100 | 3,98 |
| 150 × 120 | 6,51 |
| 200 × 160 | 11,59 |