-228x228.jpg "Polyethylene PEHD sheet, blue/black/blue, embossed, UFZ, Plaplay 15x1500x3000 mm")
Questions & Answers
Polyethylene sheets are made from: PE-HMW, PE-EL, UHMW-PE 1000, UHMW-PE 500, PE 100 RC, PE 100, PE 80, PE-HD, PE-LD.
ISO 1872 is a standard defining a classification system for polyethylene intended for extrusion and forming. It provides standardized terminology, material testing methods, and property requirements to facilitate quality control and comparisons between manufacturers and users.
ISO 1183 is a standard that specifies methods for determining the density of non-cellular plastics. This document is used for quality control and material testing to compare the composition, degree of filling, and purity of plastics.
GOST 16338-85 is a standard that defines the technical requirements for low-density polyethylene used to manufacture sheets, film materials, and pipes. This document defines classification, quality indicators, test methods, labeling rules, strength, and impurity content.
For sheets 1000×2000 mm
| Thickness, mm | Sheet weight, kg |
| 1 | 1,9 |
| 2 | 3,8 |
| 3 | 5,7 |
| 4 | 7,6 |
| 5 | 9,5 |
| 6 | 11,4 |
| 8 | 15,2 |
| 10 | 19 |
| 12 | 22,8 |
| 15 | 28,5 |
| 20 | 38 |
| 25 | 47,5 |
| 30 | 57 |
| 40 | 76 |
| 50 | 95 |
| 60 | 114 |
| 80 | 152 |
| 100 | 190 |
| Width, mm | Length, mm | Area, m² |
| 500 | 1000 | 0,5 |
| 1000 | 1000 | 1,0 |
| 1000 | 2000 | 2,0 |
| 1200 | 2000 | 2,4 |
| 1220 | 2440 | 2,98 |
| 1250 | 2500 | 3,13 |
| 1500 | 3000 | 4,5 |
| 2000 | 1000 | 2,0 |
| 2000 | 2000 | 4,0 |
| 2000 | 3000 | 6,0 |
| 2000 | 4000 | 8,0 |
| 2500 | 3000 | 7,5 |
| 3000 | 2000 | 6,0 |
| 3000 | 4000 | 12 |