Questions & Answers
Epoxy compounds are produced in the following grades: EK-22, EK-16, EZK, K-153, and K-115.
Hardeners for epoxy systems are produced in the following grades: L-19, UP-583, DETA, and TETA.
Epoxy resins are produced in the following grades: EA, ED-24, K-153, ED-22, KDA, ED-16, UP-610, ED-20, EDP, and ED-8.
International standards:
ISO 1675 — Determination of the density of liquid resins;
ISO 11357 — Thermal analysis of polymers;
ISO 4589 — Oxygen index.
GOST standards:
GOST 12172-2016 — Test methods for polymer adhesives;
GOST 15836-79 — Epoxy compounds;
GOST 4650-2014 — Determination of water absorption;
GOST 22352-77 — Determination of the efficiency of epoxy compositions;
GOST 10587-84 — Technical conditions for epoxy-diane resins.
| Volume | Weight |
| 100 ml | 0,115 kg |
| 250 ml | 0,288 kg |
| 500 ml | 0,575 kg |
| 1 l | 1,15 kg |
| 2 l | 2,3 kg |
| 5 l | 5,75 kg |
| 10 l | 11,5 kg |
| 20 l | 23 kg |
| 50 l | 57,5 kg |
| 100 l | 115 kg |
Component weight table
| Component | Average density |
| Epoxy resin ED-20 | 1,16–1,18 g/cm³ |
| ED-22 resin | 1,15–1,17 g/cm³ |
| PEPA hardener | 0,95–0,98 g/cm³ |
| TEPA hardener | 0,97–1,0 g/cm³ |
| Filled system | 1,3–1,8 g/cm³ |