Menu
Our address: Nikopol city, Trubnykiv avenue, 91, office 220
296.40 грн
/kg

Polyacetal (ROM-S), sheet, thickness 30.0 mm, size 600x2000 and 1000x2000 mm

Brand: Европа
Product Code: 05925
In Stock
296.40 грн
/kg
Buy in one click
Return guarantee Free exchange/return of goods within - 1 day Official warranty from the manufacturer - 12 months Payment Cash, Visa/MasterCard, payment via Privat24, non-cash settlement

Polyacetal (ROM-C), sheet, thickness 30.0 mm, size 600x2000 and 1000x2000 mm is an anti-friction thermoplastic material, which is also called polyformaldehyde or polyoxymethylene. This polymer has a high level of elasticity, resistance to stress and wear resistance, due to which it has been widely used in various industries.

Characteristics of Polyacetal:

• High mechanical strength, stiffness and hardness

• Very high elasticity, resilience

• Good resistance to flow (creep)

• High impact resistance, even at low temperatures

• Good dimensional stability, also at high humidity.

• Good sliding properties and wear resistance

• Stability of properties in a wide temperature range (from -50 to 100 degrees C)

• Excellent machinability

• Slight moisture absorption

• Good electrical insulating and dielectric properties

• Physiologically inert (approved for food contact)

• High resistance of black materials to UV rays

• Allows for laser marking

• Not resistant to strong acids and oxidizing agents, resistant to organic solvents, fuels of all types, alkalis

Areas of application of Polyacetal: Mechanical engineering, precision instrumentation, food industry, automotive industry, electrical engineering, medical industry, textile industry, paper and packaging industry, household appliances, etc.

Parts made from polyoxymethylene are designed for continuous operation in the temperature range from -50°C to +90°C. They withstand short-term heating up to 140°C.

Polyacetal sheet (plates) POM-S engineering plastic with high elasticity, bending and tensile strength, operating temperature from -50°C to +90°C, for a short time from -60°C to +135°C. The polymer polyacetal is resistant to shock loads, can work in water, reduces friction, is a dielectric, does not break down in oils and weak acids, can replace metals and alloys.

Polyacetal sheets (plates) POM-S (also corresponds to the name - POM, polyoxymethylene, polyformaldehyde) is a raw material in the production of parts for machine tools, machines, cars, spare parts for electrical equipment and light industry. POM-S is easy to process, the accuracy of parts is up to 0.01 mm. Polyacetal in the form of plates and sheets is used to make seals, instrument panels, parts of broaching mechanisms, conveyor belt modules...

Sheet polyacetal (plates, blocks) is supplied with a thickness of 5 to 30 mm, sheet sizes 1000*1000 mm, 1000*2000 mm. We offer polyacetal POM-S (standard polyformaldehyde), made in accordance with GOST according to STO-002-17152852-2011.

Plates are supplied cut 1000x1000 mm, we can cut you to size or make parts according to your drawing, sketch or sample.

Sheet polyacetal is a material that, due to its excellent performance, has received a wide range of applications. The distinctive advantages of polyformaldehyde include: a high level of elasticity, good protection against loads, resistance to wear and the harmful effects of organic components and excellent anti-friction properties.

Where is polyacetal sheet applied?

In fact, polyacetal sheet is an excellent replacement for thermoplastics and non-ferrous metals. Most often, the product is used in the production of electronics, in the automotive, paper, food, textile and mechanical industries.

Pom Sheet Benefits

In addition to the advantages indicated in the first paragraph, the pom sheet is also characterized by a number of other advantages. Namely:

     low coefficient of friction;

     high mechanical strength during compression (>120);

     resistance to strikes;

     impeccable degree of elasticity and elasticity;

     temperature resistance

     necessary electrical insulation;

     worthy protection against the negative effects of disinfection, weak alkalis, various oils, solvents.

Properties and characteristics of polyacetal POM-S (POM)

Polyacetal POM-S (polyformaldehyde, polyoxymethylene C cast, extrusion) is a polymeric material, engineering plastic for structural purposes with highly effective physicochemical and operational properties and characteristics, is used in many areas of modern industry, where parts made of metals and alloys are often replaced by polyacetal polymer. POM-S polyacetal has a highly crystalline structure and combines a high tensile and flexural modulus with a sufficiently high impact strength, it is one of the best materials for products that are subjected to repeated mechanical stress, shock loads, stretching and vibration. POM also has good anti-friction characteristics, high resistance to organic solvents, alkalis, technical liquids (except for concentrated acids), and ultraviolet radiation. The polymer is easy to paint, allows laser marking, welding proremoved using ultrasound. POM-S polyacetal practically does not absorb moisture; acetal parts are used for working in water.


  You can buy Polyacetal (ROM-S), sheet, thickness 30.0 mm, size 600x2000 and 1000x2000 mm from us at the best price in Ukraine. A wide range of products allows us to quickly and efficiently fulfill any order, helping to complete any construction work on time.

The main thing
View by manufacturing method
Polyacetal is a molecular weight polymerization product of formaldehyde. To obtain homopolymer and copolymer modifications of POM, the following technologies are used: Homopolymer - The main algorithm is the reaction of aqueous formaldehyde with alcohol, dehydrogenation of the aqueous hemiacetal mixture, release of formaldehyde by heating. Formaldehyde is then polymerized by anionic catalysis, and the resulting polymer is stabilized by reaction with acetic anhydride. Manufacturing - POM comes in granular form and can be formed into the desired shape by applying heat and pressure. The two most common molding methods are injection molding and extrusion. Rotational molding and blow molding are also possible.
Chemical composition
Polyacetal is a technical thermoplastic, a product of formaldehyde polymerization with a molecular weight of 40-120 kDa. White crystalline powder. It is an anti-friction thermoplastic material, also called polyformaldehyde or polyoxymethylene.
Type by purpose
Areas of application of Polyacetal: Mechanical engineering, precision instrumentation, food industry, automotive industry, electrical engineering, medical industry, textile industry, paper and packaging industries, household appliances, etc. It is a raw material in the production of parts for machine tools, machines, automobiles, spare parts for electrical equipment and light industry. POM-S is easy to process, the accuracy of the parts is up to 0.01 mm. Seals, instrument panels, parts of pulling mechanisms, and conveyor belt modules are made from polyacetal in the form of plates and sheets. Most often, the product is used in the production of electronics, automotive, paper, food, textile and mechanical engineering.
A type
Polyacetal sheet
Dimensions (width, length)
600х2000мм, 1000х2000 мм
Additional services
Cutting is carried out according to the client's order and packaging of products according to the client's orderSent by any carriers in Ukraine
The country of manufacture
Ukraine

No questions about this product, be the first and ask your question.

Онлайн курсы IT