Polyester PETG, transparent sheet, gloss, Vivak 0,75x1250x2050 mm

View by manufacturing method

First, a hardener (peroxide), inhibitor, plasticizers, UV stabilizers, and pigments are added to the unsaturated polyester resin. Then, a reinforcing material—fiberglass mat or fiberglass fabric—is added. After this, the sheet is formed. During manual forming, the resin is applied in layers to the mold, alternating with fiberglass fabric. During machine forming, the resin and fiberglass are fed onto a moving film, then passed through calenders and a drying tunnel. The resin then hardens under heat (around 100°C) or at room temperature. The finished sheet is cut to size and sometimes coated with a protective varnish or an anti-UV layer if the material is intended for outdoor use.

Chemical composition

This material is based on unsaturated polyester resin reinforced with fiberglass or other fillers. This composite material consists of an organic polymer matrix and reinforcing fillers.

Type by purpose

It is used for roofing, particularly transparent and corrugated sheets for hangars, warehouses, canopies, and greenhouses. It is also used as translucent inserts in roofs and facades of industrial buildings, as well as for wall and partition cladding. It is used to make body paneling, panels, and decorative elements. It is popular for the production of boat, yacht, and marine hulls. It is also used to create decorative panels and facades with colored or textured surfaces.

A type

Polyester sheet

Dimensions (width, length)

1250x2050 mm

Additional services

Cutting is carried out according to the client's order and packaging of products according to the client's orderSent by any carriers in Ukraine

The country of manufacture

Ukraine