Viniplast rod

Viniplast rod made of unplasticized polyvinyl chloride is a rod of a round profile. It is used as an ornamental material in the manufacture of industrial products.

    Operating temperature range from -10oC to +60oC. It is allowed to operate at temperatures up to -50 ° C in cases where the products are not subjected to mechanical stress.

    Bars, slats for laying between the pipe holder (weight) and the pipe itself. As a mechanical protection when laying the pipeline.

1. Length, mm, not less than 1300

2. Width, mm 500-1300

3. Thickness, mm 2.0-10.0

4. Yield strength, MPa (kgf/cm2), not less than in tension 50.0 (500)

5. Elongation at break, %, not less than 10

6. Softening temperature according to VIKA, oС, not lower than 85

Modulus of elasticity, Gn/m2 (kgf/cm2) 3-4 (30,000-40,000)

8. Brinell hardness, Mn/m2 (kgf/mm2) 130-160 (13-16)

9. Heat resistance according to Martens, oС 65-70

10. Frost resistance, C -15

11. Specific heat capacity, kJ / (kgxK) [kcal / (gxC)] 1.13-2.14 [0.27-0.51]

12. Thermal conductivity coefficient, W / (mxK) [kcal / (mxhx oС)] 0.15-0.16 (0.13-0.14)

13. Temperature coefficient of linear expansion, oС-1 (65-80) x10-6

14. Electrical resistivity:

volumetric, Tom/m (ohmxcm) surface volume (ohm).

10 (1015)

100 (1014)

15. Electrical strength (at 20oC), Mv/m or sq/mm 15-35

16. Dielectric constant:

at 50 Hz at 800 Hz.

4.1

3.1-3.5

17. Density, g/cm3 1.38-1.40

18. Dimensional change during heating, %, no more than 5

     You can buy Viniplast core from us at the best price in Ukraine. A wide range of products allows us to quickly and efficiently fulfill any order, helping to complete any construction work on time.