Silicone tube 3mm -50mm

Brand: Украина

Product Code: 5375

In Stock

13.39 грн

Found this product cheaper?

Dimensions (width, length)

Return guarantee Free exchange/return of goods within - 1 day Official warranty from the manufacturer - 12 months Payment Cash, Visa/MasterCard, payment via Privat24, non-cash settlement

Silicone tubes 3mm -50mm are made of heat-resistant organosilicon rubber. They demonstrate resistance to numerous influences, Tubes are not afraid of moisture, various aggressive substances. In addition, the products (silicone hoses) are absolutely safe. This is due to the fact that silicone does not cause allergic reactions and is non-toxic. Thanks to this, the tube can be used in medical centers, laboratories, and other similar facilities.

The advantages of the presented drip hoses also include high flexibility and elasticity. Silicone products can have a diameter of 3 to 50 cm. Due to this, they are used not only for droppers, but also for other purposes (pumping liquids and other media) in the chemical, food and other industries.

The rubber or silicone tube can be white, transparent or colored.

It is also important that silicone can be sterilized in an autoclave, exposed to high and low temperatures. Tubes made from it do not lose their properties over time. Dropper products, other products may come into contact with the human body. The tube will not irritate or cause an allergic reaction.

CHARACTERISTICS OF SILICONE HOSES

Silicone products retain their performance from -50C to + 250C.

Resistant to ozone, sea and fresh water (including boiling water), alcohols, mineral oils and fuels, weak solutions of acids, alkalis.

Resistant to radiation, UV radiation, electric fields and discharges.

The properties of the silicone tube are practically independent of temperature and do not change under the influence of light and air. Due to these qualities, the application possibilities of silicone rubber tubing are extremely varied and cover many industries.

You can buy Silicone tube 3mm -50mm from us

at the best price in Ukraine. A wide range of products allows us to quickly and efficiently fulfill any orders, helping to complete any construction work on time.

The main thing

Diameter

25 32 40 50 20 16 mm

View by manufacturing method

The process of laying a cable channel for electrical wiring is carried out in two stages. At the initial stage, the places where the ends of the pipes will go are determined - distribution panels, controllers, electrical receivers and other equipment. And at the next stage, they determine the trajectory of the line, mark the attachment points, calculate the angles of rotation and the places where the boxes will be installed. Bending plastic pipes can be done by heating them up to 100 ℃, and it is worth taking into account the microclimate in the room where the work is being done. To avoid condensation accumulation, the line should be placed at a slight slope. Next, the metal elements of the electrical wiring are connected to zero and grounded with a copper jumper from the pipe to the housing. Grounding nuts can be used for these purposes. Read also: “What types of metal pipes for electrical wiring are there - characteristics and selection rules.” Before finally tightening the pipes, they need to be blown out and then leveled. The connection of individual cable sections can only be done in boxes, and in no case in the cable channel itself. To do this, when laying the wire in the box, you need to leave cable sections with a small margin. Please note that the resistance between the pipe and the wires cannot be lower than 0.5 MOhm.

Chemical composition

For the manufacture of HDPE pipes, low-density polyethylene (outer layer) and high-density polyethylene (smooth inner layer) are used. Polyvinyl chloride as a material for pipes used for laying wires is an almost ideal material

Type by purpose

The corrugation can be used to lay electrical cables with voltages up to 1000V, as well as telephone cables, computer and television network cables. The corrugation reliably protects wiring in fireproof structures, in walls, floors and ceilings. It does not interact with mortars, so it is perfectly covered in furrows with plaster. In addition to hidden wiring, corrugation is used for open wiring on non-flammable and difficult to combustible materials. It is worth considering that corrugation loses its properties from ultraviolet radiation. Double-layer corrugated HDPE pipes are used to protect low and high voltage cables from external influences, mechanical influences and aggressive environments. Used for laying cables in the ground (trenches).

A type

A tube

Additional services

Cutting is carried out according to the client's order and packaging of products according to the client's orderSent by any carriers in Ukraine

The country of manufacture

Ukraine

No questions about this product, be the first and ask your question.