Road strip, width 1.8 m is a linoleum of increased wear resistance, it is a two-layer PVC material with a relief pattern in the form of a convex coin or stripes and a warm felt (textile) base made of non-woven fabric that does not shrink, which reinforces the top layer. The non-woven base is firmly bonded to the polymer coating and is easily glued to the floor, while further improving its sound and heat insulation properties.
Rubber track is one of the most durable finishing materials used as an anti-slip protective floor covering.
Modern technologies make it possible to produce car tracks using various impurities and additives in the process. This improves product quality. Modern automotive linoleums do not harden in severe frost and tolerate low temperatures well. They are more elastic and are subject to any adjustment with the help of tools. Today, natural rubber, polymeric materials and other synthetic components are widely used in the production. The presence of rubber rubber in the composition of the roads makes this product environmentally friendly. The natural rubber used in the production of roadways eliminates the unpleasant "rubber" smell from the products. In addition, products made of rubber or polymers having the properties of natural rubber have a high resistance to mechanical stress and resistance to gasoline and oils.
Density - 1.46 g / cm3
Elongation at break - 280
Tensile strength - 4.2 MPa
Hardness - 70+/-5 Shore A
Working temperature from - 45°С to +70°С.
The rubber track is a rolled rubber product, enjoys well-deserved popularity among motorists, for organizing the life of private homeowners. The main purpose of the car track is to protect the interior of the car from moisture, dirt. In everyday life, this product is used for upholstery of thresholds, covering driveways, garden paths.
The car track is made of synthetic rubbers using reinforcing textile fabrics and chemical modifiers that give the rubber the required physical and mechanical characteristics: elasticity, elasticity, resistance to low and high temperatures, wear resistance. Produced in rolls 1.2 m high, up to 10 m long, designed for operation at ambient temperatures from -50°C to +50°C. The outer surface has reefs with a depth of 1 to 3 mm. Corrugation on rubber rolls partially retains dirt, water, and also increases anti-slip properties.
Purpose and scope
Roll of rubber car track with fabric coating (car mat)
Motorists use this product as a practical and cheap alternative to original floor mats. The dimensions of the rubber track in rolls allow you to cut a car mat of any size and configuration (into the passenger compartment or trunk). In addition to passenger cars, rolled rubber coatings are widely used in buses, trolleybuses, and other types of public transport.
Private homeowners use rubber roll paths for upholstery of steps, sills, for laying them on driveways, walkways, garden paths, or others. , does not deform under the wheels of even heavy vehicles. And rubber paths between the beds make it possible to keep clean in your suburban area, regardless of the season and weather.
These rubber products are also often used as an anti-slip coating in industrial premises, car washes, technical premises of supermarkets, catering kitchens, children's and sports grounds, etc.
Storage conditions
Rubber in rolls should be stored indoors on racks or pallets at a temperature not lower than -25°C, at least 1 meter away from heat sources. Storage in rooms with ozone-producing equipment is prohibited. Exposure to rubber products of acids, alkalis, oils, gasoline and their vapors is not allowed. The rubber should not be exposed to direct sunlight during storage.
This coating has the following advantages:
high strength and elasticity;
resistance to low and high temperatures;
the ability to maintain its shape under stress;
easy care - can be washed with plain water;
long service life and affordable cost.
You can buy anti-slip track with a coin or strip pattern in rolls to solve several problems at once: from protecting the floor of the car and facilitating the collection of debris to making the surface more attractive.
Roadways are produced with a corrugated front surface. Only the depth of the reefs, sizes and thickness differ. The temperature range for operation of automobile rubber carpets, makes from -45° to +70°С.
Modern technologies make it possible to produce rubber mats using various impurities and additives in the process. This improves product quality. Modern highways do not harden in severe frost and tolerate low temperatures well. They are more elastic and are subject to any adjustment with the help of tools. Today, natural rubber, polymeric materials and other synthetic components are widely used in the production. The presence of rubber in the composition of the roads makes this product environmentally friendly. The natural rubber used in the production of roadways eliminates the unpleasant "rubber" smell from the products. In addition, products made of rubber or polymers having the properties of natural rubber have a high resistance to mechanical stress and resistance to gasoline and oils.
Anti-slip rubber track "strip"
Due to the high wear resistance of the anti-slip rubber track "strip", it can be used in places with a high concentration of people and truck bodies. The product is made from certified raw materials that do not have a negative impact on human health during operation. In the manufacture, natural rubber is used, which deprives the road of an unpleasant smell. This component gives the product high resistance to mechanical stress and resistance to aggressive liquids, gasoline and oil.
The composition of the floor covering "coin"
One of the most high-strength anti-slip floor coverings in transport is a highway with a "coin" and "stripe" pattern. It is a two-layer material of increased wear resistance, consisting of PVC. The material of the product is a non-woven base bonded with a polymer coating. The product provides perfect adhesion to the floor of the vehicle. If you place the road in the back of a truck, it will reliably protect its surface from corrosion, since it does not absorb or let moisture through.
Properties of anti-slip rubber track
An important advantage of the anti-slip rubber track is durability. The rubber coating is resistant to mechanical, chemical, vibration loads, which ensures the preservation of the original properties and qualities for many years. Other advantages of material in rolls include:
providing reliable adhesion to various types of shoe soles, which guarantees the safety of movement around the facility;
water resistance, quick drying of moisture on the surface;
resistance to temperature extremes, the ability to use in various conditions.
Thanks to the use of high-quality rubber raw materials, the track with "coin" and "stripe" patterns is suitable for use over a long period. The anti-slip coating is resistant to frost and low temperatures, does not lose elasticity, therefore it is resistant to cracks and other types of deformation.
Durable roadways with "coin", "stripe" patterns in rolls
One more advantage of a rubber road in rolls with drawings "coin", "strip" is simplicity of operation. The coating is easily cleaned from various contaminants. The relief projector is made in such a way that, if necessary, you can easily remove dirt that does not have time to linger even between small elements of the picture.
You can order an anti-slip road with “coin”, “stripe” patterns in an unlimited amount. This is a great opportunity to make a purchase with the maximum benefit, because the prices in the online store are among the most favorable in Ukraine. Products will please with excellent quality, as well as a long service life.
You can buy from us the Road strip, width 1.8 m at the most favorable price in Ukraine. A wide range of products allows us to quickly and efficiently fulfill any order, helping to complete any construction work on time.
