Technical plate MBS / Rubber MBS 6 mm

Technical plates MBS / Rubber MBS 6 mm (oil and petrol resistant) GOST 7338-90 are used for sealing fixed joints, preventing friction between metal surfaces, for the perception of single shock loads, as well as gaskets and floorings.

         MBS plate is used in the creation and repair of all kinds of technology, devices and equipment. In this regard, the demand for it is always high.

         Oil-and-petrol resistant technical plate (MBS) is produced in accordance with the requirements of GOST 7338-90 and is intended for use in conditions of direct exposure to various oils and fuels with an oil base. A feature that distinguishes the MBS oil and petrol resistant rubber plate from other types is its resistance to the effects of synthetic and mineral oils. Rubber sheet MBS retains its elasticity and other physical and mechanical properties in contact with oils and petroleum products.

 MBS plate is used in the creation and repair of all kinds of technology, devices and equipment. In this regard, the demand for it is always high.

TYPES OF HARDNESS OF TECHNICAL PLATE MBS

 soft (M)

 medium hardness (C)

 increased hardness (T)

               TEKHPLASTINA TMKSH - M which is used together with this abbreviation means the degree of hardness of the material: soft technical plate. The operating temperature range of MBS M technical plates, as well as of hard and medium technical plates, is -30 .. + 80 C. The material can be used directly in gasoline, various oils, as well as in petroleum-based fuel at a pressure of 0.05. .10 MPa. If the working medium is inert gases or nitrogen, then a pressure of 0.05..0.4 MPa is allowed. According to Shore, the MBS-M plate corresponds to the hardness values ​​of 40..55 units.

These technical plates have different thicknesses. It can fluctuate within 1..80 mm. Shaped products are produced by vulcanization on special presses. The result is a square rubber plate that can be used to manufacture repair kits, various gaskets, seals and joint sealants.

              TEKHPLASTINA MBS - C technical name corresponds to the middle class of hardness of rubber plates, the main physical and mechanical property of which is oil and petrol resistance. This means that MBS - S rubber can be used under conditions of constant or occasional exposure to machine oils, various petroleum products and fuels and lubricants, while it does not lose its flexibility, elasticity and elasticity.

In particular, the MBS-S plate is used as an insulating, sealing and protective material. With its help, parts and mechanisms are protected from abrasion, as well as from chemical and mechanical effects of various substances. The working temperature range of this material is considered to be the following values: -30 .. + 80 C.

            Technical plate MBS - S according to GOST 7338 90 is designed for such pressure

            in different environments:

in oils, gasoline, as well as in other types of petroleum-based fuels, allowable pressure values ​​are 0.05..10 MPa;

if the working medium is inert gases or nitrogen, then the material is designed for use at a pressure of 0.05..0.4 MPa.

             Rubber MBS - S belongs to the middle category of hardness. This means that according to Shore's classification (for polymer vulcanization products, the hardness is measured by indentation), the hardness of this material varies within 55..70 units. The harder the material, the more durable and wear-resistant it is. At the same time, soft technical plates are more suitable for high-quality sealing of joints and joints. That is, each class of material corresponds to certain operating conditions.

           Plates of the MBS-T class are used especially importantly for sealing and sealing joints in working units of specialized equipment. This type of material is resistant to technical oils and refined fuels. Modification "T" means an increased degree of material hardness, which means that products made from such plates will stretch to a minimum along the inner diameter, which makes them a more wear-resistant option compared to existing alternatives. In addition, the MBS-T technical plate also has excellent thermal stability. In particular, products made of this type of plates can be successfully operated at a temperature of -45 C, while for soft material and plates of medium hardness, the minimum value is -30 C.

  You can buy MBS Technical Plate / MBS Rubber 6 mm from us at the most favorable price in Ukraine. A wide range of products allows us to quickly and efficiently fulfill any orders, helping you to complete any construction work on time.