Concentric stainless steel transition ф 114.3х3 / 60.3х2.9 A304 (08H18N10)

Brand: Украина

Product Code: 2056

In Stock

200.00 грн

/pcs

Found this product cheaper?

Return guarantee Free exchange/return of goods within - 1 day Official warranty from the manufacturer - 12 months Payment Cash, Visa/MasterCard, payment via Privat24, non-cash settlement

Concentric stainless steel transition ф 114.3х3 / 60.3х2.9 A304 (08H18N10) - the part of the pipeline is designed to smoothly change the diameter of the pipeline and is a piece of pipe with different diameters at the ends, installed when installing the pipeline in areas where it is necessary to smoothly switch from one diameter on the other, that is, to reduce or increase the amount of transporting fluid. In other words, the use of this part allows you to optimally distribute the load in different sections of the pipeline, where it is necessary to increase the pressure and pressure by narrowing the pipes or, on the contrary, to decrease it by expanding the pipes.

Transitions are:

concentric, conventionally designated by the letter "K"

eccentric, conventionally designated by the letter "E".

In concentric transitions, the centers of the diameters of the inlet and outlet are located on the axis of symmetry, and in eccentric ones, the centers of displacement relative to each other and are located on two parallel axes.

Eccentric transitions are shaped like a taper with offset bases, which makes them more commonly used in horizontal pipelines. Eccentric transitions help to avoid stagnation of the transported substance, as well as, if repairs, routine maintenance of the pipeline or other problems are required, greatly facilitates its release from the liquid.

Concentric transitions are used in various industries: oil and gas industry, chemical and energy industry, as well as utilities, etc.

Depending on the properties of the transported flow and environmental conditions, concentric and eccentric transitions can be made according to steel 20, 09G2S, 15X5M, 12X18H10T, etc.

You can buy a Concentric stainless steel transition from us. ф 114.3х3 / 60.3х2.9 A304 (08H18N10) at the best price in Ukraine. A wide assortment allows us to quickly and efficiently fulfill any orders, helping you to complete any construction work on time.

The main thing

Diameter

108х3,6/57х2,9 139,7х4,0/76,1х2,9 108х3,6/48,2х2,9 133х4,0/76,1х2,9 133х4,0/108х3,6 108х6,0/57х4,0 139,7х6,3/114,3х6,3 114,3х3,6/60,3х2,9 426х12/273х8 114,3х3,6/48,3х2,6 108х3,6/48,3х2,6 108х8,0/88,9х6,0 108х3,6/88,9х3,2 108х4,0/57х4,0 114х5,0/76,1х5,0 139,7х6,3/60,3х4,5 57х2,9/33,7х2,6 57х3,0/32х3,0 48х3,0/42х3,0 48,3х2,6/42,4х2,6 mm

Class

Stainless steel pipeline fittings

View by manufacturing method

suture (welded), turned, stamped-welded, stamped (seamless)

Chemical composition

Low carbon stainless steel, austenitic type (non-magnetic)

Type by purpose

Stainless steel transitions are used on vertical and horizontal sections of the pipeline for smooth transitions from one pipe diameter to another, ensuring the required tightness of the joints. The cone optimally distributes the difference in pressure in the pipes, reducing the load on joints and welds. When the pipe diameter changes downward, the pressure inside the pipe increases, and at the same time the pressure increases. Expanding the diameter, on the contrary, allows you to reduce the pressure inside the pipe, thus removing excess load from it. Given these capabilities, steel transitions perform an important function in load planning, as well as pressure distribution within pipelines. Stainless steel transitions are widely used in the construction of pipelines in the chemical, oil and gas, utilities, energy and other industries. Designed for connecting pipes of different diameters during the construction of pipelines for various purposes. The pipeline part is designed to smoothly change the diameter of the pipeline.

A type

Stainless steel transition

The country of manufacture

Ukraine

No questions about this product, be the first and ask your question.