Poltava sheet copper M1, M2 0.4-45 mm, 600x1500mm, copper 1000x2000mm, cutting tape

Poltava sheet copper M1, M2 0.4-45 mm, 600x1500mm, copper 1000x2000mm, cutting tape

Copper sheet or plate refers to long products and is produced in accordance with the conditions specified by GOST 495-92. For the manufacture of this type of rolled products, copper of such grades as M1, M2 or M3 is used.
Many enterprises are engaged in the production and sale of copper sheet. This is due to the wide use of this product.
Copper sheet production
Copper sheet is produced by flat rolling on special machines in a cold-rolled or hot-rolled way. Copper sheets are made up of 99% base metal. Therefore, the raw material, that is, the copper casting, should contain as few impurities as possible. Otherwise, their presence at the box office will affect the consumer qualities of the sheet.
The maximum content of copper in products is achieved by refining the source material. For example, the method of fire refining involves the preliminary placement of copper ingots in special furnaces. Then air is injected into them under pressure. The oxygen contained in it removes (burns out) unwanted impurities from the metal.
This product belongs to non-ferrous rolled products and has certain properties:

- copper sheets are well processed. It does not require sophisticated equipment. They have a high level of weldability, which allows them to produce a wide variety of products;
- high resistance to various external influences. Copper is not susceptible to corrosion. It does not deform and does not lose its properties as a result of temperature changes, retains an attractive appearance in a slightly aggressive environment. Such qualities significantly expand the scope of these products;
- durability. Rolled copper products can last more than a hundred years. At the same time, they will not lose their useful properties;
- high electrical and thermal conductivity. These qualities also expand the scope of use of this type of non-ferrous rolled products.

Copper is produced at factories in rolls or pieces with non-shaped edges. At the same time, the dimensions of the sheet can be both measured and determined in agreement with the customer and be individual.
Copper Sheet Application
Due to its qualities, the copper sheet is used quite widely, various parts and products are made from it:

- roofing materials. Such materials are distinguished by durability and the ability to maintain their original attractive appearance throughout the entire operational period. The only drawback of such roofing materials is the price. Their cost is great. However, this more than pays off with the functionality and aesthetic appeal of such roofs;
- Wind instruments are made from copper sheet. There is simply no good alternative. Copper gives ideal qualities to tools;
- this type of rolled product is used in mechanical engineering. Bearings and radiators, as well as other parts are made of copper;
- elements of heating devices, which is due to the high thermal conductivity of copper and its stability;
- details of electric generators and radio equipment;
- various cables, tips, contact connections;
- used in the chemical industry. Parts for various chemical equipment are produced from this rolled metal;
- decorative elements. Since this metal lends itself to forging, beautiful and durable forged products are obtained from it, which adorn many houses;
- air conditioning equipment.

As can be seen from the above, rolled copper products are used very widely. They are in demand in various industries and households.
However, these qualities of rolled copper refer only to quality products.
Therefore, when buying such a rental, it is necessary to carefully approach the choice of a supplier. Moreover, such products are expensive.
It is for this reason that it is impossible to choose only on the basis of price. Otherwise, there is a great risk of acquiring low-quality rolled products.
It is corrosion resistant, malleable and has high electrical conductivity. Copper is weather and water resistant, so it can withstand long-term outdoor use.
Copper rolled metal is not afraid of temperature changes, it is resistant to heat, tolerates the effects of an aggressive environment well, and is easy to manufacture. Copper strips and sheets can be soldered, cut and processed in other ways. Copper is a soft metal, so it can be easily molded into various shapes. And the copper sheet GOST 1173 is no exception. From this product, you can produce almost any product, of various shapes and sizes.
Short description

The excellent combination of quality and cost makes copper sheets very popular among the population and production. These products have the following characteristics:
1. good production capacity. Allows you to produce copper sheets of any size and shape.
2. heat resistance. Withstands extreme temperatures, both low andand high.
3. chemically inert. Can be used in aggressive environments without the risk of deformation.
4. Corrosion resistance. Can be used in all conditions, even in high humidity.
5. electrical conductivity. Good conductor of electricity.

First of all, it must be said that copper is a ductile metal, which allows you to create various shapes from sheets. It is also important that copper sheets have excellent electrical and thermal conductivity. They are resistant to temperature changes, due to which they are used in the production of electrical engineering, heating and climate equipment.
However, the most significant quality of copper sheets is durability. If you use a copper sheet as part of a particular design, you can not worry about providing them with additional protection against the negative effects of corrosion. After operation for several years, only a small, thin coating appears on the surface of the copper sheet, which is called patina - a film of copper oxide. But it just serves as a protective layer against the destruction of the product as a result of corrosive processes.
Another reason why copper sheet is a sought-after non-ferrous product is the ability to solder any defect formed during the use of this product. Due to the ease of repair and high resistance to corrosion, the life of the copper sheet is at least 100-150 years. When producing copper sheets at the factory, the presence of chips and burrs on the edges of the sheets is not allowed. Such sheets are rejected. They must be smooth, of the same size and thickness and without holes. Copper is easy to machine. It is easy to drill, weld and cut. When working with this metal, observe safety precautions. Wear glasses to protect your eyes. Use special gloves to protect your hands. Buy copper sheets only from trusted suppliers who have a license to manufacture this product. This will save you from buying low-quality and defective goods. Nowadays, the scope of copper is very wide and is in high demand in many industries. Copper sheets are made in a thickness ranging from zero point four to forty-five millimeters. The sheet sizes are available in two options: the first is one thousand five hundred millimeters long and six hundred millimeters wide. The second is two thousand millimeters long and one thousand millimeters wide. This metal does not lose its properties in a fairly wide temperature range, from minus eighty to plus one hundred and twenty degrees Celsius. Decorative elements are made of copper, for this its surface is carefully polished to a mirror shine. The service life of sheets made of copper is very impressive - from one hundred to one hundred and fifty years. Copper is an excellent conductor of electricity and heat, it is resistant to moisture and aggressive chemicals. For several years after use, a thin protective layer called patina forms on the surface of the sheet. Wind musical instruments are made of copper: saxophones, trombones and trumpets. Polished copper has a good aesthetic appearance. This metal resonates well with sound waves, which is why musical instruments are made of it. High-quality and expensive roofing is made of copper. It has a very beautiful appearance, such roofing is very reliable and durable. However, its price is very high. Copper is a very flexible material that bends easily. Copper sheet can be given almost any shape during further processing. In the automotive industry, copper is used to make radiator and bearing parts. This metal is also used in the space industry.