Uzhgorod brass circle LS59-1, L63, brass blank and rod, brass square and hexagon, brass sheet, brass tape, brass casting bushing

Uzhgorod brass circle LS59-1, L63, brass blank and rod, brass square and hexagon, brass sheet, brass tape, brass casting bushing

Brass circle (bar) - a metal product made of brass alloys with a round section, manufactured by hot and cold rolling. Brass has exceptional properties, in connection with which the products have a number of advantages. This multicomponent alloy has been known for more than one century, and to this day it is successfully used in mechanical engineering, instrument making, construction, and the electric power industry. Brass round timber is easy to machine (stamping, milling, cutting), as well as welding. Brass products are resistant to corrosion, magnetic fields, have good strength, wear resistance and durability.
Specifications of brass round bar
Production of brass round bars is carried out in accordance with GOST 2060-2006 Brass bars. Specifications from brass LS 59-1 and LS 63 in accordance with GOST 15527-2004. Alloys copper-zinc (brass), processed by pressure. Stamps
The brass circle is different:

     by accuracy (normal, increased, high)
     manufacturing method (drawn by cold working and extruded by heat working)
     length (multiple, measured and unmeasured length)
     material condition (soft, semi-hard, hard)
     diameter (from 3 to 180 mm depending on the type of alloy, manufacture and condition of the material)

In addition, a circle of brass with special properties is produced: anti-magnetic, increased plasticity, etc.
The bars are manufactured in accordance with all the requirements of GOST 2060 and 52597 and are sold at the best prices. You can choose materials for different applications, whether it is the production of shut-off and control valves, fasteners or interior items. You can choose from cold- and hot-worked, semi-solid products of normal and increased accuracy. Rolled products of this grade are made from alloys L63, LS59-1 and other grades.
Brass circles have a number of practical properties, such as:

     sufficiently high strength with good ductility;
     anti-corrosion resistance even in contact with aggressive media;
     ease of processing (nuts, screws, gears, parts of gas reducers, taps and other products are made from brass circles).

Rolled metal of this grade is always available at our bases in different regions of the country. Due to the presence of our own fleet of vehicles, delivery is carried out in a short time and is cheaper.
Circle brass LS59-1 rod all-metal profile of round section. Made from deformed brass or cast brass. The properties of rolled products depend on the composition of the original alloy and the method of production. Compared with copper, copper-zinc alloy has good corrosion resistance. However, cold worked brass discs made from plain and special brass are prone to stress corrosion cracking. The brass most susceptible to stress corrosion cracking is brass marked L-68 and L-63.
In terms of tensile strength and hardness, the copper-zinc alloy is superior to copper. Carbide brass plates are harder than copper.
Benefits of brass ring
Circle brass LMTs is characterized by high wear resistance, high corrosion resistance, high electrical and thermal conductivity. Brass circle is suitable for processing: cutting, milling, welding. Rolled brass does not have high anti-friction properties. Products made from it are not used in a mechanism whose parts are constantly wearing out.
Compared to copper, brass and semi-finished products have the advantage of lower cost. The alloy can be melted down and used to produce new parts and profiles.
In addition to the lack of anti-friction properties, the brass ring does not increase heat resistance.
Marking and classification
The production of brass cartridges is regulated by GOST and numerous technical conditions. GOST 15 527-2004 defines the chemical composition of alloys. The antimagnetic ring is manufactured in accordance with GOST 15 527.
General purpose rods are manufactured in accordance with GOST 494-90 by cold deformation (L63, L68) and pressing (L63, LS59, LZhMts 59-1-1). LS59 is used to produce low cost billets by continuous casting. Brass round LS59-1 has the mechanical properties of low pressure processing and is processed into tubes by continuous casting. The cost of such a circle is much lower than the suppressed one.
According to the manufacturing method, there are two types of brass circles:

Thermal deformation or pressing;
Cold working or drawing.
In addition, the circle is:

Anti-magnetic
Soft
Increase plasticity.
According to the state of the metal, the brass circle has the following differences:

Soft
semi-solid
hard.
The circle length can be:

Measurement
Not measured
A multiple of the dimension.
Advantages of brass circles:

• the possibility of processing by welding, soldering, deformation;
• attractive appearance of the product (in demand in the field of design);
• resistance to airthe action of external factors of various origins;
• high rates of strength and durability;
• facilitated transportation and storage;
• extensive scope;
• resistance to corrosion processes;
• relatively small weight;
• strength and reliability of final products;
• high rates of plasticity;
• resistance to influence of the damp environment;
• acceptable market value.

The manufacturing process of brass circles implies strict adherence to certain rules. If technologies are violated, the final product will significantly reduce its technical and operational characteristics. That is why it is extremely important to purchase products only from reliable and trusted suppliers.
Examples of applications for brass circles:

• production of watch mechanisms;
• chemical industry;
• production of furniture fittings;
• aviation and space industry;
• creation of advertising products for various purposes;
• production of gas reducers;
• production of decorative elements;
• mechanical engineering and automotive industry.