Uzhgorod stainless steel corner, hexagon stainless steel AISI304, AISI321, circle (bar), stainless steel pipe grinding, polishing, mirror, cutting and delivery (Metallobaza)

Uzhgorod stainless steel corner, hexagon stainless steel AISI304, AISI321, circle (bar), stainless steel pipe grinding, polishing, mirror, cutting and delivery (Metallobaza)

Equal-shelf and unequal-shelf corner AISI 304 is a bent metal product with high strength and no deformation. The L-shaped shape and a large selection of sizes make the stainless steel product in demand in various areas:

     Construction - for foundations, a stainless steel corner, the price for which is indicated on the website, is an indispensable structural element due to its resistance to corrosion when exposed to ground and melt water;
     Frame collapsible structures, welded structures, stairs, fences, bridge structures;
     Pharmaceutics and chemical industry - the resistance of stainless steels to aggressive environments makes it possible to use such a corner for the manufacture of equipment operating under extremely high loads;
     Decorative elements and architectural structures - polished is popular with designers - decorators and in skillful hands will be a spectacular decoration for both residential premises and commercial areas.
Stainless corner - production, classification and characteristics
The variability of alloying components, the use of different grades of steel, the choice of production method ultimately affects the strength, stiffness and its physical and mechanical properties. GOST defines the characteristics of hot-rolled and bent corners.
The classification is as follows:

     Hot-rolled - stainless is characterized by higher strength compared to bent. The method of production is the broaching of heated blanks on a specialized mill, followed by compression and pressing to the specified parameters. Steel thickness 3 - 10 mm, shelf width 20 - 100 mm;
     Bent - produced on a roll forming mill, steel thickness 1.5 - 2 mm, flange width 20 - 50 mm;
     A welded corner stands out as a separate segment, its use is a rather rare case and usually it is an individual production for certain sizes of metal structures.

The stainless steel product is supplied by the Rent Metall company in Moscow and the region in batches of measured, random and multiple lengths - 4.5 - 12 meters. The most demanded values are 5.5; 6 and 6.1 meters, the metal product can be used to reinforce long-span ceilings, to create special protective boxes for laid communications.
The corner is also distinguished by the size of the shelves - equal-shelf and unequal-shelf, by the type of surface treatment - polished, matte or mirror. The assortment is regulated by GOST 8509-93, and the products supplied by the company meet the stated standards.
Corner from stainless steel — rolled metal of high-quality type. This is a long product, the adjacent strips of which are at an angle of 90 degrees to each other. The stainless steel corner has good characteristics, as well as high strength and aesthetic appearance. In the First metal store "SHOPMETAL" for this rolled products are moderate prices.
The use of stainless steel
Stainless steel corner is used:

     in construction;
     architecture;
     machine tool industry;
     decoration;
     chemical industry - stainless steel is resistant to aggressive environments;
     food industry - environmentally friendly and safe material suitable for long-term storage.

Material classification
Depending on the physical properties and method of manufacture, several varieties of steel corners are distinguished. According to the production method, there are the following types of stainless steel corners:

     bent;
     hot rolled.

The first of them is distinguished by greater dimensional accuracy and attractive appearance due to mirror polishing. Stainless steel corner of the second type is more durable.
Depending on the accuracy of rolling, angles are distinguished:

     ordinary precision;
     increased accuracy.

This classification is applicable to hot-rolled products.
Depending on the type of surface treatment, a stainless corner is distinguished:

     with a mirror surface;
     with a matte surface;
     with a polished surface.

Depending on the size and ratio of shelves (side walls), a stainless steel corner can be:

     equal-shelf;
     unequal.

Based on the length ratio parameters:

     measured length;
     unmeasured length or, as it is also called, a multiple of measured length.

Characteristics of stainless steel angle
The stainless steel corner is made of high-alloy steel of various grades. Thanks to this finished product, the following characteristics are inherent:

     heat resistance;
     chemical resistance;
     resistance to corrosion and other aggressive influences.
  Hexagon is one of the types of long products. In fact, this is a bar with six corners in the section. It is used both as a raw material for the production of other stainless steel products, and as an independent product.

The main features that distinguishit from similar products from other steels:

     resistance to aggressive environmental influences - moisture, high or low temperatures (in the range from -196 to +600 degrees Celsius), chemical effects of salts, some acids and alkalis;
     resistance to mechanical stress - dents or scratches will not appear on the surface of a large product;
     environmental friendliness - the material does not emit toxic substances into the external environment.

The production of hexagons takes place in two main ways: hot rolling and forging. Calibrated products are characterized by high dimensional accuracy, due to which they are often used in instrumentation, medical and scientific projects, and pharmacology. The product is suitable for creating strong frames in the construction of various structures, ranging from buildings to mechanical engineering.
AISI 304 belongs to the group of austenitic stainless steels with a low carbon content. The alloy is alloyed and has a high content of valuable metals. So, the specific gravity of nickel does not fall below 10%, and chromium - 18%. Therefore, the brand is resistant to many substances, such as acids, and has high anti-corrosion qualities. The alloy can withstand short exposure to high temperatures up to 900 °C.
Due to the high technical characteristics of AISI 304, hexagons made from this alloy are in demand as blanks for the manufacture of various components for mechanisms and construction objects. The latter are durable and reliable, well processed by welding. A stainless hexagon can be produced both by hot (GOST 2879-88) and cold-rolled (8560-78), as well as by forging.
AISI 304 hexagon is a kind of high alloy stainless steel equilateral hexagonal bar. Possesses the increased heat resistance, resistance to corrosion. To give a marketable appearance and remove scale, the top layer is pickled. The bars acquire a beautiful gray color and a smooth surface. Production is carried out by means of hot or cold rolling between rolls of a metallurgical mill.
Technical characteristics of AISI 304 hexagon
The sold products are high-precision long products with a matte surface. The length can vary from 2 to 6 meters, at the request of the consumer - from 1.5 to 12 m. The characteristics of the alloy depend on its chemical composition. Austenitic steel grade AISI 304 contains chromium - 18%, nickel from 8 to 10%, nitrogen about 0.1%. The addition of a small amount of carbon makes the material very strong.
The main characteristics of the alloy:

     strength and wear resistance;
     plasticity, which allows for mechanical processing;
     weldability without restrictions;
     resistance to corrosion processes;
     chemical inertness.

AISI 304 stainless hexagons retain their original appearance for a long time, despite aggressive environmental factors. Our range includes products with a diameter of 6 to 50 mm and a length of 4100 to 4200 mm. The surface of the bars is matte, without defects and pollution.
Benefits and scope
Calibrated bars are the most common type of long products. They are used in the metallurgical, engineering and construction industries. This is due to the strength of the material, high corrosion resistance, convenient shape of the workpiece.
Chemical inertness and environmental friendliness allow the use of AISI 304 hexagons in the food industry. Heat resistance, wear resistance and ductility - in the aviation and automotive industries. They are in demand in the manufacture of trucks, in the construction industry, food and chemical industries.
AISI 304 stainless steel hexagonal bars are used in the space and defense industry. Bushings, shafts, bearings and compressor parts are made from them. In construction - the production of durable fasteners - bolts, self-tapping screws, screws. In the chemical industry, they are necessary for the manufacture of equipment in moderately aggressive environments.