Questions & Answers
Steel grades of galvanized masonry mesh
Main steel grades: St3ps, St3kp, St2kp, St2ps, St1kp, St1ps.
Reinforcing steels: B500C, A500C, A400 (A-III), A240 (A-I).
Standards for galvanized masonry mesh
GOST Standards:
GOST 14098–2014 — Welded Joints in Reinforcement
GOST 9.302–88 — Test Methods for Coatings
GOST 23279–2012 — Welded Reinforcement Meshes for Reinforced Concrete Structures
GOST 9.301–86 — Requirements for Protective Coatings
GOST 9.307–89 — Hot-Dip Galvanized Coatings
GOST 8478–81 — Welded Meshes for Masonry Reinforcement
GOST 5781–82 — Hot-Rolled Reinforcing Steel
GOST 1050–2013 — High-Quality Carbon Steel
GOST 380–2005 — Carbon Steel
GOST 3282–74 — Low-carbon steel wire;
GOST 6727–80 — Reinforcing wire with ribbed cross-section.
Table of weights of galvanized masonry mesh
| Wire diameter, mm | Cell size, mm | Weight of 1 m², kg |
| 2,0 | 50×50 | 1,6 |
| 2,0 | 100×100 | 0,8 |
| 2,5 | 50×50 | 2,5 |
| 2,5 | 100×100 | 1,25 |
| 3,0 | 50×50 | 3,6 |
| 3,0 | 100×100 | 1,8 |
| 3,0 | 150×150 | 1,2 |
| 4,0 | 50×50 | 6,4 |
| 4,0 | 100×100 | 3,2 |
| 4,0 | 150×150 | 2,1 |
| 5,0 | 50×50 | 10 |
| 5,0 | 100×100 | 5,0 |
| 5,0 | 150×150 | 3,3 |