Questions & Answers
Vinyl plastic rod grades
Vinyl plastic rods are produced in the following grades: VD, PVC-C, VX, RPVC, VP, VNE, VN, UPVC, VDT, PVC-U.
Vinyl plastic rod standards
International standards:
ISO 178 — Determination of flexural strength;
ISO 75 — Heat distortion temperature;
ISO 527 — Tensile testing;
ISO 1183 — Determination of the density of plastics.
GOST standards:
GOST 12423-2013 — Conditions for conditioning plastics;
GOST 15088-2014 — Determination of the softening point;
GOST 15139-69 — Method for determining the density of plastics;
GOST 11262-80 — Tensile testing method;
GOST 26996-86 — General technical requirements for plastics;
GOST 9639-71 — Technical conditions for vinyl plastic rods.
Table of weights of vinyl plastic rods
| Diameter, mm | Weight of 1 m, kg |
| 5 | 0,03 |
| 6 | 0,04 |
| 8 | 0,07 |
| 10 | 0,11 |
| 12 | 0,16 |
| 14 | 0,22 |
| 16 | 0,28 |
| 18 | 0,36 |
| 20 | 0,44 |
| 25 | 0,69 |
| 30 | 0,99 |
| 35 | 1,35 |
| 40 | 1,76 |
| 45 | 2,23 |
| 50 | 2,75 |
| 60 | 3,96 |
| 70 | 5,39 |
| 80 | 7,03 |
| 90 | 8,9 |
| 100 | 10,99 |
| 120 | 15,83 |
| 150 | 24,73 |
| 200 | 43,96 |