Resin tape 50 mm is a tape flexible electrical insulating material made on the basis of cotton-polyester fabric impregnated with bitumen and mineral oil. Does not contain impurities that can have a destructive effect on conductor materials.
They are used to seal the places where cables and wires enter the couplings and boxes; insulation of wires in couplings and boxes; insulation of wires at communication points; protection of cable and wire ends from moisture; pipeline insulation.
Nominal thickness mm 0.8±0.15
Nominal roller width mm 20, 30, 50, 60, 75
Roller outer diameter mm 160±10
Roller inner diameter mm 36±2
Average electrical strength, not less than kV/cm 2.5
Breaking tensile stress, not less than N/cm 100
Moisture absorption, no more than % 100
Pasting speed, no more than m/min 0.75
Heat resistance °C There should be no leakage of the binder when the roller is heated for 30 ± 1.0 minutes, at a temperature of 40 ° C ± 2 ° C
Heat resistance class B (130°C)
Among electrical insulating materials, resin tape, as an excellent dielectric, is popular in many industries. The product is a strip of cotton fabric impregnated with a bituminous substance. This is a special impregnating mass obtained by fusing bitumen with machine oil. It is the composition of the impregnation that provides the electrical insulating characteristics of the tape. The technological process of manufacturing a product consists of two main stages: the initial impregnation of fabrics and their subsequent cutting into strips.
The fabric has a high degree of stickiness: this is one of its main properties; the interaction of the tape with the conductors does not affect their parameters in any way. The quality of the series is checked using heating at a temperature of +1000 degrees for 15-16 hours. At the end of the experiment, the color of the copper rod on which the tape is wound should not change.
An important quality parameter of the product, in addition to stickiness, which must be present when it is used in a production environment: the absence of any foreign materials and substances in the composition. Otherwise, the resin tape will not be able to ensure the electrical insulation of materials.
Scope of application and supply
The product is widely used as insulation, also for other purposes:
● for sealing those parts of the cable that are attached to couplings, terminal boxes and other connecting elements;
● it is used to insulate wires where they are connected;
● protects the ends of the wires from getting wet or getting condensate, as well as other external factors that can damage mechanisms and assemblies;
● insulating material is used as a replacement for rubberized tape if the latter is not available.
The industry produces two series of fabric insulators: LN - used for outdoor work and LP - for underground work. Resin tape is supplied in skeins, which are wrapped in special technical oiled paper, then bundles are placed in boxes made of cardboard. Standard roller width: 60 mm, but on request it is possible to produce rollers with a width of 50, 60 and 75 mm. The rollers are stored for a year and a half, after which they lose their properties.
Main characteristics
1. Thickness (mm): 0.6-1
2. Unsticking speed (seconds): 30
3. Electric field strength (megavolts per meter): 2
4. Operating temperature: from –30 to +60
5. Moisture absorption (%): 1
6. Heat resistance class °C: 105
7. Roller diameter outside (mm): 160
8. Roller diameter inside (mm): 35
Quality Assurance Properties
The quality of the tape of materials of this type is indicated by the manufacturer in the description, additional experiments make it possible to confirm these characteristics. The dimensions of the insulator cannot increase by more than 10%, provided that it is left in the production room for 24 hours at a humidity of 92%. It is unacceptable for the bituminous mass to flow out when heated to 400 ° C for half an hour.
Application Benefits
Insulating and protective materials in the form of adhesive tapes are practically indispensable elements of production due to their clear advantages:
high tensile strength or breaking stress;
ability to absorb moisture;
resistance to heating processes and high temperatures;
no change in properties under scattered sunlight.
Additionally, fabric insulators have adhesion to plastics and steel, resistant to oil-rosin impregnating composition of aggregates.
You can buy resin tape 50 mm from us at the best price in Ukraine. A wide range of products allows us to quickly and efficiently fulfill any order, helping to complete any construction work on time.
